Bedienungsanleitung Casals VNPLI18M-2 (Seite 7 von 84) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

727571

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

- Let the appliance running with no load for

30 seconds in a safe position. If you no-

tice serious vibration or other defects stop

the appliance immediately. Then check the

problem and /or proceed as we describe on

Anomalies and Repair clause.

- The appliance can be used on surfaces such

as: wood, cardboard, plastic, plaster, etc.

Product description and Specications

Description

1 Keyless chuck

2 Torque adjustment ring.

3 Cooling vents

4 Soft grip

5 Power light

6 Forward/reverse switch

7 On / Off / speed adjustment switch

8 Battery release button

9 Battery

10 Function ring

11 Charger

12 Gear Selector

If the model of your appliance does not

have the accessories described above,

they can also be bought separately from

the Technical Assistance Service.

Charging the battery

Caution: A new battery is not fully charged

and must therefore be charged before the

appliance is used for the rst time.

Caution: During the handling of batteries, do

not touch both poles at the same time, as

this will provoke the partial discharge of the

stocked energy therefore affecting longevity.

- Charge the battery at an atmospheric tem-

perature of between 4 and 40ºC.

- When the battery is empty, the appliance

is switched off by means of a protective cir-

cuit. The inserted tool no longer rotates.

- Plug the charger (11) into the mains. And

the green pilot light will turn on

- Remove the battery (9) from the appliance

by pressing the battery unlocking button (8)

and pulling the battery out of the appliance

- Insert the battery (9) into the charger (11).

(Fig B)

- The green pilot light will turn off and the

red pilot will turn on to indicate that the bat-

tery is under charging process.

- Once the charge is completed the red pi-

lot light will turn off and green pilot light will

turn on.

- When the battery is charged disconnect

the charger from the mains supply.

- Remove the battery (9) pressing the bat-

tery unlocking button (8) and pulling the bat-

tery out of the appliance.

Instructions for use

Before use:

- Make sure that all the product’s packaging

has been removed.

- Ensure that the voltage indicated on the

rating label matches the mains voltage be-

fore plugging in the appliance.

- Before using this product for the rst time,

it is important to make a full charge of bat-

teries.

Inserting a bit:

- To open the drill’s chuck (1), whilst com-

pletely switched off, take rm hold of the

back part of the chuck and turn the front

part of the chuck counter clockwise.

- Insert the drill bit, screwdriver bit, or other

tool/ accessory required for the task, into

to be worked in place. The work will be safer

if both hands are free to control the tool.

- Do not touch any of the appliance’s moving

parts while it is operating.

- Fully unroll the appliance’s power cable be

fore each use.

- Keep hands and other body parts well away

from the work area whist the tool is in use.

- Do not use the appliance if its accessories

are not properly tted.

- Do not use the appliance if the accessories

or consumables attached to it are defective.

Replace them immediately.

- Disconnect the appliance from the mains

when not in use and before undertaking any

cleaning task.

- This appliance is for household use only,

not professional, industrial use.

- This appliance is intended for adult use.

Ensure that this product is not used by the

disabled, children or people unused to its

handling.

- This appliance is not a toy. Children should

be supervised to ensure that they do not play

with the appliance.

- Do not store the appliance on areas where

the temperature could be lower than 2ºC

- Do not expose the appliance to extreme

temperatures.

- Do not expose to extreme temperatures or

strong magnetism.

- Keep the appliance in a dry, dust-free

place, out of direct sunlight.

- Always check the workpiece before opera

tion and remove any obstructions such as

nails, staples, screws, string, rags, cloths

and other debris.

- Only use the appliance for carrying out dry

tasks.

- Do not use the appliance on any part of the

body of a person or animal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casals VNPLI18M-2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info