Bedienungsanleitung Casals VNPLI18M-2 (Seite 9 von 84) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

727571

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

- Clean the equipment with a damp cloth

with a few drops of washing-up liquid and

then dry.

- Do not use solvents, or products with an

acid or base pH such as bleach, or abrasive

products, for cleaning the appliance.

- Do not let water or any other liquid get into

the air vents to avoid damage to the inner

parts of the appliance.

- Never submerge the appliance in water

or any other liquid or place it under running

water.

- If the appliance is not in good condition

of cleanliness, its surface may degrade and

inexorably affect the duration of the appli-

ance’s useful life and could become unsafe

to use.

Supplies

- Always use original supplies, designed

specically for your appliance model.

- These supplies are available in specialist

shops.

Anomalies and repair

- Take the appliance to an authorised tech-

nical support service if product is damaged

or other problems arise. Do not attempt to

disassemble or repair the appliance your-

self as this may be dangerous.

- If the connection to the mains has been

damaged, it must be replaced, take the ap-

pliance to an authorised technical support

service. Do not attempt to disassemble or

repair the appliance by yourself in order to

avoid a hazard.

- The appliance should not be in use when

changing the speed

Select the function (Fig A, C)

Driving

- Turn the selector (10) until the arrow on

the appliance points to ( ).

- Turn the selector (2) from (1) to (21) until

the desired result is obtained.

Drilling

- Turn the selector (10) until the arrow on

the appliance points to ( ).

Drilling with Impact Function

- Turn the selector (10) until the arrow on

the appliance points to ( ).

Use:

- Select the appliance function desired. (2)

- Turn the appliance on, by using the on/

off button (7)

Once you have nished using the appli

ance:

- Stop the appliance by releasing the on/off

switch.

- Remove the battery from the appliance if

you are not intending to use the appliance

during an extended period.

- Clean the appliance.

Cleaning

- Disconnect the appliance from the mains and

allow it to cool before undertaking any clean

ing task.

- Clean the electrical equipment and the mains

connection with a damp cloth and dry. DO

NOT IMMERSE IN WATER OR ANY OTHER

LIQUID.

Specifications: VNPLI14M-2 VNPLI18M-2

- Rated Voltage (V): 14.4 18

- Battery capacity (A·h): 1.5 1.5

- No load speed (rpm): 0-400/0-1500 0-400/0-1500

- Max drilling torque (N.m): 28 30

- Maximum capacity in steel (mm): 10 10

- Maximum capacity in wood (mm): 25 25

- Maximum capacity in masonry (mm): 8 8

- Drill chuck capacity (mm): 1-10 1-10

- Keyless Chuck Yes yes

- No. of torque settings 21+2 21+2

- Reversible / Electronic yes yes

- Charging time (hours): 1 1

- Weight (Kg:) 1,25 1,35

- Sound Pressure level (LpA) = 84.4B(A), KpA = 3dB (LpA) = 84.7B(A), KpA = 3dB

- Sound Power level (LwA) = 95.4dB(A), KWA = 3dB (LwA) = 95.7dB(A), KWA = 3dB

- Vibration 6,445 m/s2, K=1,5 m/s2 9,138 m/s2, K=1,5 m/s2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casals VNPLI18M-2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info