Bedienungsanleitung Casals VNPLI18M-2 (Seite 8 von 84) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

727571

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

- Clean the equipment with a damp cloth

with a few drops of washing-up liquid and

then dry.

- Do not use solvents, or products with an

acid or base pH such as bleach, or abrasive

products, for cleaning the appliance.

- Do not let water or any other liquid get into

the air vents to avoid damage to the inner

parts of the appliance.

- Never submerge the appliance in water

or any other liquid or place it under running

water.

- If the appliance is not in good condition

of cleanliness, its surface may degrade and

inexorably affect the duration of the appli-

ance’s useful life and could become unsafe

to use.

Supplies

- Always use original supplies, designed

specically for your appliance model.

the chuck. In order to obtain a secure fas-

tening of the bit, insert the bit as far as you

can into the chuck. Take rm hold of the

back part of the chuck and turn the front

part of the chuck clockwise until it is rmly

closed.

- In order to remove accessories from the

chuck, follow the same steps as indicated

previously but in reverse order

Screwing, drilling/unscrewing:

- To drill or screw, ALWAYS have the direc-

tion set to clockwise (CW).

- To unscrew, set the direction to counter

clockwise (CCW).

- The appliance should not be in use when

changing the screwing direction.

How to select the direction of the rota-

tion (Fig A)

- Do not change the direction of the rotation

whilst the tool motor is in operation.

- The appliance has a selector (6), which al-

lows the direction of rotation to be changed.

Electronic speed control: (Fig A)

- The speed of the appliance can be regu-

lated according to the pressure exerted on

the on/off switch (7). This function is very

useful, as it makes it possible to adapt the

speed of the appliance to the type of work

that needs to be done.

- If the appliance works continuously at low

speed, working life of the appliance will be

reduced considerably.

Mechanical Speed change (Fig C)

1st speed: Move backwards the selector

(12)

2ond speed: Move forwards the selector

(12)

- The appliance should not be in use when

changing the speed

Select the function (Fig A, C)

Driving

- Turn the selector (10) until the arrow on

the appliance points to ( ).

- Turn the selector (2) from (1) to (21) until

the desired result is obtained.

Drilling

- Turn the selector (10) until the arrow on

the appliance points to ( ).

Drilling with Impact Function

- Turn the selector (10) until the arrow on

the appliance points to ( ).

Use:

- Select the appliance function desired. (2)

- Turn the appliance on, by using the on/

off button (7)

Once you have nished using the appli-

ance:

- Stop the appliance by releasing the on/off

switch.

- Remove the battery from the appliance if

you are not intending to use the appliance

during an extended period.

- Clean the appliance.

Cleaning

- Disconnect the appliance from the mains and

allow it to cool before undertaking any clean-

ing task.

- Clean the electrical equipment and the mains

connection with a damp cloth and dry. DO

NOT IMMERSE IN WATER OR ANY OTHER

LIQUID.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casals VNPLI18M-2 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info