Bedienungsanleitung Casio 2220 - WristCamera (Seite 6 von 8) (Englisch)

534449

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

2220-6

IR MODE

Use the IR Mode to exchange data between two watches or between your

watch and computer.

Note

• An infrared adapter (PAD-2) is required to exchange data with a computer.

• For details about the procedure for exchanging data with a computer, see

the documentation contained on the CD-ROM that comes with the PAD-2

infrared adapter.

Exchanging Data Between Two Watches

To exchange data between two watches, orient the watches as shown below.

• The above 10cm (4 inches) and 30-degree maximums shown in the above

illustration apply only when the watches are pointed straight at each other.

The maximum allowable distance may be less if either watch is at an angle

(not pointed straight).

• Proper data communication may also be impossible if the two watches are

too close to each other.

To enter the IR Mode

In the Timekeeping Mode, press D five times to enter the IR Mode. An initial

screen appears for about one second, followed by the COM (IR Mode) menu.

• If you leave the watch in the IR Mode for about two minutes without performing

any operation, it automatically changes to the Timekeeping Mode.

STOPWATCH MODE

The Stopwatch Mode lets you measure

elapsed time, split times, and two finishes. The

range of the stopwatch is 23 hours, 59

minutes, 59.99 seconds.

To measure times with the stopwatch

Elapsed Time

Split Time

Two Finishes

Note

• The elapsed time measurement operation continues even if you exit the

Stopwatch Mode.

STW

‰H

‰‰

Hours

Minutes

Seconds

1/100 second

IR port

30 degrees

maximum

10cm (4 inches) maximum

COM

OTHERS

▲

Initial screen COM menu

Start Stop Re-start Stop Clear

Split releaseStart Split Stop Clear

Start Split

First runner

finishes.

Stop

Second runner finishes.

Record time of first

runner.

Split release

Record time of

second runner.

Clear

EE E E B

EB B E B

EB E B B

COM

OTHERS

SEND

RECEIVE

SEND

OTHERS

SEND

Pointer

To send a single image

1. On the COM menu, press E to move the

pointer to OTHERS.

2. Press F to display the OTHERS menu,

with the pointer located next to SEND.

3. Press F again to display the image

selection screen.

4. Use E (+) and B (–) to scroll through the

images and display the one you want to

send.

• Holding down either button scrolls at high

speed.

5. Align the IR ports of the two watches with

each other.

• Put the receiving watch into receive standby

at this time. See “To receive a single image”

for more information.

6. On the sending watch, press F to send

the displayed image.

• The data send screen shown nearby

appears while an image send operation is in

progress.

• The message OK appears momentarily after

the image send operation is complete. Next,

the watch returns to the image selection

screen in step 4 of the above procedure.

• After you are finished sending images, press D to return to the

Timekeeping Mode.

Note

• Pressing A during the above procedure displays the COM menu.

• Pressing D during the above procedure returns to the Timekeeping Mode.

To receive a single image

1. On the COM menu, press E to move the

pointer to OTHERS.

2. Press F to display the OTHERS menu,

with the pointer located next to SEND.

3. Press E to move the pointer to RECEIVE.

4. Press F again to enter receive standby,

which is indicated by the screen nearby.

5. Align the IR ports of the two watches with

each other, and perform the send operation

on the sending watch.

• See “To send a single image” for more

information.

• The message OK appears momentarily,

followed by the received image. Next, the

watch returns to the receive standby screen

in step 3 of the above procedure.

• After you are finished receiving images, press D to return to the

Timekeeping Mode.

Note

• Pressing A during the above procedure displays the COM menu.

• Pressing D during the above procedure returns to the Timekeeping Mode.

COM

OTHERS

SEND

RECEIVE

OTHERS

RECEIVE

Pointer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 2220 - WristCamera Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 2220 - WristCamera

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info