Bedienungsanleitung Casio 5381 - BGA-180 (Seite 2 von 7) (Englisch)

624955

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Operation Guide 5381

E-19

3. After the setting is the way you want, press A to return to the Timekeeping

Mode.

Note

• After you specify a city code, the watch will use UTC* offsets in the World Time

Mode to calculate the current time for other time zones based on the current time

in your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping.

The reference point for UTC is Greenwich, England.

E-18

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City, and selecting

either standard time or daylight saving time (DST).

To conﬁ gure Home City settings

1. In the Timekeeping Mode, hold down A until ADJ

appears.

• This indicates the city code setting mode.

• The hour and minute hands automatically move out of

the way at this time (page E-15).

2. Press D (East) and B (West) to select the city code

you want to use as your Home City.

• Keep pressing D or B until the city code you want

to select as your Home City appears on the display.

• For details about city codes, see the “City Code

Table” at the back of this manual.

City Code

E-17

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

• Each press of A cycles the digital display contents as

shown below.

Month-Day Day of the Week Seconds Hour : Minutes

A A A

PM indicator

Hour

Month-Day

Minutes

Tide indicator

(Page E-32)

E-16

2. Holding down B again as you press C will cause the hands to return to their

normal positions (normal timekeeping).

Note

• This operation can be performed in any mode. In the case of a setting mode

(setting ﬂ ashing on the screen), the hands will move out of the way automatically,

even if you do not perform the above operation.

• Watch button functions are the same regardless of whether the hands are move

out of the way or at their normal positions.

• Changing to another mode will cause the hands to move back to their normal

positions.

• The hands also will move back to their normal positions automatically if no

operation is performed for about one hour.

E-15

Moving the Hands Out of the Way for Better Viewing

You can use the procedure below to temporarily move the hour and minute hands

out of the way to better view what is on the display.

1. While holding down B, press C.

• This will cause the hour and minute hands to move to a location where they do

not block your view of the tide indicator and/or digital display.

Example: When the current time is 8:20

Flashes while the hands are moved out of the way.

E-14

General Functions (All Modes)

The functions and operations described in this section can be used in all of the

modes.

• Auto Return Features

The watch will automatically return to the Timekeeping Mode if you do not perform

any operation for a certain amount of time, as described below.

Mode Approximate Elapsed Time

Thermometer, Alarm, Tide/Moon

2 to 3 minutes

Time or other setting mode

(information ﬂ ashing on the display)

Tide Change After the tide change indication process is complete

• Scrolling

The B and D buttons are used on the setting mode to scroll through data on the

display. In most cases, holding down these buttons during a scroll operation scrolls

through the data at high speed.

E-13

Stopwatch Mode

Countdown Timer

Mode

World Time Mode

Alarm Mode

Counter Mode Tide/Moon Mode

C C

CCC

E-12

Selecting a Mode

• Press C to cycle between the modes as shown below.

• To return to the Timekeeping Mode from any other mode, hold down C for about

two seconds.

• In any mode (except a setting mode), press B to illuminate the display.

Timekeeping Mode

Thermometer

Mode

Tide Change

Mode

* The mode that appears ﬁ rst is the one that was selected when you last used the Thermometer

or Tide Change mode.

E-11

To do this: Enter this mode: See:

Use the stopwatch to measure elapsed time Stopwatch Mode E-46

Use the countdown timer Countdown Timer Mode E-49

Set an alarm time Alarm Mode E-52

E-10

Mode Reference Guide

The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current date in the Home City

• Conﬁ gure Home City and daylight saving time (DST)

settings

• Conﬁ gure time and date settings

• View the current tide level

Timekeeping Mode E-17

Take temperature readings Thermometer Mode E-25

View tide changes over the next 12 hours Tide Change Mode E-33

Count objects Counter Mode E-41

View tide level and moon age for a speciﬁ ed date

and time

Tide/Moon Mode E-35

View the current time in one of 48 cities

(31 time zones) around the globe

World Time Mode E-42

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 5381 - BGA-180 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5381 - BGA-180

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info