586703

Casio 5425 Seite 4

4
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
Operation Guide 5146 5425
E-30
To view the current time in another time zone
In the World Time Mode, use
'
to scroll through available city codes (time zones).
• The lower digital display will show the time in the currently selected World Time
City.
• A PM indicator (
P
) will be displayed in the lower digital display between the hours
of noon and midnight.
• When the city code (time zone) you want is selected, you can press
$
to display
the date. After about one second, the watch will resume regular timekeeping for the
currently selected city.
Press $.
One second
Hour : Minutes
Seconds
Date
PM indicator
E-31
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, press
'
to display the city
code (time zone) whose Standard Time/Daylight Saving
Time setting you want to change.
2. Hold down
$
for about three seconds to toggle
between Daylight Saving Time (
DST
indicator
displayed) and Standard Time (
DST
indicator not
displayed).
• A
DST
indicator will be displayed in the lower digital
display if Daylight Saving Time is turned on.
• You can turn on DST individually for each city code,
except UTC.
• Turning on DST for the city code that is currently
selected as your Home City will turn on DST for normal
timekeeping.
DST indicator
E-32
Swapping your Home City and World Time City
You can use the procedure below to swap your Home City and World Time City. This
changes your Home City to your World Time City, and your World Time City to your
Home City. This capability can come in handy when you frequently travel between two
cities in different time zones.
To swap your Home City and World Time City
1. In the World Time Mode, use
'
to select the World Time City you want.
2. Hold down
$
and
%
until the watch beeps.
• This will make the World Time City you selected in step 1 your Home City, and
cause the hour and minute hands to move to the current time in that city. At the
same time, it will change the Home City you had selected prior to step 2 your World
Time City, and cause the content of lower digital display to change accordingly.
• After swapping the Home City and World Time City, the watch stays in the World
Time Mode with the city that was selected as the Home City prior to step 2 now
displayed as the World Time City.
E-33
Alarms
When an alarm is turned on, the alarm tone will sound
when its alarm time is reached. One of the alarms is a
snooze alarm, while the other four are daily alarms.
You also can turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
• There are fi ve alarm screens numbered
AL1
,
AL2
,
AL3
and
AL4
for the daily alarm, and a snooze alarm screen
indicated by
SNZ
. The Hourly Time Signal screen is
indicated by
SIG
.
• All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing
&
(page
E-7).
Alarm number
Alarm time
(Hour : Minutes)
E-34
To set an alarm time
1. In the Alarm Mode, use
'
to scroll through the alarm
screens until the one whose time you want to set is
displayed.
SIG
AL1 AL2 AL3 AL4 SNZ
•
To set a daily alarm, display alarm screen AL1, AL2,
AL3 or AL4. To set the snooze alarm, display the
SNZ screen.
• SIG is the Hourly Time Signal setting (page E-37).
• The snooze alarm repeats every fi ve minutes.
2. After you select an alarm, hold down
$
for about three seconds until the hour
setting of the alarm time starts to fl ash. This is the setting mode.
• This operation turns on the alarm automatically.
3. Press
&
to move the fl ashing between the hour and minute settings.
4. While a setting is fl ashing, use
'
(+) and
%
(–) to change it.
5. Press
$
to exit the setting mode.
On/Off status
E-35
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm operation is performed a total
of seven times, every fi ve minutes, or until you turn the alarm off (page E-36).
• Alarm and Hourly Time Signal operations are performed in accordance with the
current time in your Home City, as kept in the Timekeeping Mode.
• To stop the alarm tone after it starts to sound, press any button.
• Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-9)
Displaying the
SNZ
setting screen (page E-34)
E-36
To turn an alarm on and off
1. In the Alarm Mode, use
'
to select an alarm.
2. Press
$
to toggle it on (
on
) and off (
OFF
).
• Turning on a alarm (
AL1
,
AL2
,
AL3
,
AL4
or
SNZ
)
displays the alarm on indicator on its Alarm Mode
screen.
• In all modes, the alarm on indicator is shown for any
alarm that currently is turned on.
• The alarm on indicator fl ashes while the alarm is
sounding.
• The snooze alarm indicator fl ashes while the snooze
alarm is sounding and during the 5-minute intervals
between alarms.
Alarm on
indicator
Snooze
alarm
indicator
On/Off
status
E-37
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use
'
to select the Hourly Time
Signal (
SIG
) (page E-34).
2. Press
$
to toggle it on (
on
) and off (
OFF
).
• The Hourly Time Signal on indicator is shown on the
display in all modes while this function is turned on.
Hourly time signal
on indicator
On/Off
status
E-38
Illumination
An LED (light-emitting diode) illuminates the face of the
watch for easy reading in the dark. The watch’s auto light
switch turns on illumination automatically when you angle
the watch towards your face.
• The auto light switch must be turned on (indicated by
the auto light switch on indicator) for it to operate.
• See “Illumination Precautions” (page E-46) for other
important information about using illumination.
To illuminate the display manually
In any mode, press
%
to turn on illumination.
• The above operation turns on illumination regardless of
the current auto light switch setting.
• You can use the procedure below to select either 1.5
seconds or 3 seconds as the illumination duration.
When you press
%
, illumination will remain on for about
1.5 seconds or 3 seconds, depending on the current
illumination duration setting.
Auto light switch on
indicator
E-39
To specify the illumination duration
1. In the Timekeeping Mode, hold down
$
until the
display contents start to fl ash. This is the setting mode.
2. Press
&
nine times to display the current illumination
duration
LT1
or
LT3
.
3. Press
'
to toggle the setting between
LT1
(1.5
seconds) and
LT3
(three seconds).
4. Press
$
to exit the setting mode.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio 5425 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Casio 5425

Casio 5425 Bedienungsanleitung - Deutsch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info