Bedienungsanleitung Casio PL-40R (Seite 25 von 50) (Englisch)

466869

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

E-57

Using the Sequencer

The following procedure contains only the most basic steps

for realtime recording. For other techniques you can use

during this procedure, see “Other System Track Realtime

Recording Techniques” on page E-58.

1. Press the SEQUENCER button.

 This causes the button’s indicator lamp to light,

indicating that sequencer is turned on.

2. Select the song area to which you want to

record.

 Use [+]/[–] buttons or the selector dial to select a

song area number in the range of 1 to 10.

 After a few seconds, the display changes to the

play standby. You can also display the play

standby by pressing the EXIT/NO button.

3. Press the SEQUENCER button to display the

main sequencer menu.

 Use the [ ]/[ ] buttons to select the setting you

want.

4. Specify the time signature and make any

metronome settings you want to use while

recording.

 Use “Metronome Setting 5 : “Metro”” in the

Setting Mode on page E-63 to make metronome

settings.

 After you select a setting, press the SEQUENCER

button or the EXIT/NO button to return to the

play standby screen.

5. Make the piano control panel settings you want

to use when you start your recording.

 Select the tone, rhythm, and auto accompaniment

mode using the same procedures as those for

normal keyboard play. “Other System Track

Realtime Recording Techniques” on page E-58

also contains related information about these

settings.

 See “System Track Data” on page E-54 for

information about what parameters you can set

prior to recording.

6. If you want to change mixer parameter settings,

hold down the FUNCTION button and press

PART/(MIXER) button and then configure the

settings you want.

 You can use the mixer to change the parameters

of auto accompaniment and melody parts.

 After making the settings you want, press the

EXIT/NO button to return to the recording

screen.

7. Press RECORD button to enter the Realtime

Record Mode.

 The button’s indicator lamp flashes and the

sequencer goes into system track record standby.

8. Play something on the keyboard to start actual

recording.

Current measure and beat numbers

 If you want to input rests (blank spaces) at the

beginning of a song, press the START/STOP

button to start recording, and then input as many

rests as you want. Next, play what you want on

the keyboard.

 During recording, the metronome sounds (but is

not recorded) according to the settings you made

in step 4.

9. Play what you want on the keyboard.

 Auto accompaniment chord changes, as well as

pedal and other operations are also recorded.

 See “System Track Data” on page E-54 for more

information about the type of data that is

recorded.

10. After you are finished playing what you want,

press the START/STOP button to stop

recording and change to the sequencer’s

playback screen.

 Pressing the START/STOP button at this time

plays back what you just recorded. See “Playing

Back from Sequencer Memory” on page E-60 for

more information about playback.

Realtime Recording

Realtime Recording to the System Track

426-E-059A

PL40NE01-1.book 57 ページ２００２年７月２３日　火曜日　午後６時５２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PL-40R Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PL-40R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info