Bedienungsanleitung Chicco Next 2 Me (Seite 18 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

767822

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

18 19

N2 C

IMPORTANT- RETAIN FOR FUTURE REF-

ERENCE - READ CAREFULLY.

WARNING: BEFORE USE, REMOVE AND

DISPOSE OF ALL PLASTIC BAGS AND

PACKAGING MATERIALS AND KEEP THEM

OUT OF REACH OF CHILDREN.

· WARNING: This product is intended

for use for babies aged between 0 and 6

months, weighing up to a maximum of 9

kg .

· WARNING: When a child is able to sit,

kneel or to pull itself up, the crib shall not

be used anymore for this child.

· WARNING: Do not use the product if any

part is broken, torn or missing.

· WARNING: Be aware of the risk of open

ﬁres and other sources of strong heat,

such as electric bar ﬁres, gas ﬁres, etc.

· Before assembly, check that the product

and all of its components have not been

damaged during transportation. Should

any part be damaged do not use and keep

out of reach of children.

· Make sure the users of this product are

knowledgeable on its proper operation.

· WARNING: the product is ready for use

only when all locking mechanisms are en-

gaged. Check carefully that these are en-

gaged before use.

· WARNING: When the child is left unat-

tended in the product, in ‘’crib mode’’, al-

ways make sure that the side rail is raised

and the zippers are completely closed.

· When the product is being used especially

in ‘’crib mode’’, the wheels must be always

locked.

· All opening, adjusting, anchoring and posi-

tioning operations of the product must be

carried out exclusively by an adult.

· Before use in ‘’Co-sleeping mode’’ (Fixed

to the bed)’’ make sure the product is

properly anchored and positioned.

· WARNING: When the product is used in

‘’Co-sleeping mode’’ (Fixed to the bed)’’,

before laying the child in it, make sure

that the connection belts are hooked and

tensioned properly, the product must be

secured to the parents’ mattress and no

gaps between the products and the adults’

mattress must be present.

· The product must always be placed on a

horizontal surface. Never leave the prod-

uct on an inclined surface with the child

inside of it.

· Children must not be permitted to play

without supervision near the product.

· Do not use the product without the frame.

· Keep the fastening belts away from the

reach of children.

· The thickness of the mattress must be

such that the vertical height (upper sur-

face of the mattress until the upper edge

of the product’s sides) is at least 200 mm.

Do not use more than one mattress in the

crib.

· If you purchase a mattress separately,

make sure it is suitable for the product.

· The reference mark on the product’s inte-

rior indicates the maximum thickness of

the mattress that shall be used.

· Do not leave any object inside the product

that could reduce its depth.

· Do not position the cot near walls and ob-

stacles to prevent trapping hazards.

· Do not leave small objects inside the prod-

uct to prevent chocking hazards.

· Use only spare parts approved by the

manufacturer. Do not apply accessories to

the product, which are not supplied by the

manufacturer.

· Do not adjust the product with the child

inside.

· Do not move the product with the child

inside.

· Do not use the product with more than

one child at a time.

· The product must be kept away from elec-

tric cables and cords: do not place the

product near windows where cords, cur-

tains or similar objects could pose chock-

EN ing or strangling hazards for the child.

To avoid strangling hazards, do not give

to your child or place near him, objects

equipped with cords.

· A prolonged exposure to the sun may

cause changes of tones to the product’s

colour. After a prolonged exposure of the

product to high temperatures, wait a few

minutes prior to placing your child in it.

· When not in use, keep the product away

from the reach of children.

· All assembly ﬁttings should always be

tightened properly and that care should

be taken that no screws are loose, be-

cause a child could trap parts of the body

or clothing (e.g. strings, necklaces, ribbons

for babies’ dummies, etc.), which would

pose a risk of strangulation.

COMPONENTS

A. Support leg with wheels

B. Support leg with non-slip feet

C. Central supporting structure

D. Fixing belts

E. Fabric lining

F. Mattress with removable cover

G. Upper tubular structure

H. Upper removable tubular structure

I. Bag

A1) Height adjuster button

A2) Removable structure support

A3) Height indicator

A4) Feet rotation release button

A5) Adjustable feet

A6) Wheels with brake

B1) Non-slip feet

B2) Structure ﬁxing for central support

C1) Fixing pin

C2) Fabric lining ﬁxing button

C3) Grey ﬁxing buckles

D1) Red anchoring buckles

E1) Belt with clip

E2) Pocket

E3) Zip for fabric removal

E4) Zip for co-sleeping opening

E5) Mesh window

E6) Side support for restraint

G1) Leg ﬁxing

H1) Removable tubular structure release button

L) Maximum limit for mattress height

ASSEMBLY OF THE CRIB

1. Hold the support leg making sure that the external tube slides

upwards until you hear the locking CLICK in the ﬁrst position

(ﬁg. 1). Repeat the same operation with the other support leg.

2. Fix the central supporting structure to the 2 legs as illustrated

in ﬁgure 2. The CLICK of the pivot indicates correct ﬁxing of the

Chicco Next 2 Me Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info