767822

Chicco Next 2 Me Seite 19

19
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
18 19
‘’Co-sleeping mode’’ (Fixed to the bed)’’,
before laying the child in it, make sure
that the connection belts are hooked and
tensioned properly, the product must be
secured to the parents’ mattress and no
gaps between the products and the adults’
mattress must be present.
· The product must always be placed on a
horizontal surface. Never leave the prod-
uct on an inclined surface with the child
inside of it.
· Children must not be permitted to play
without supervision near the product.
· Do not use the product without the frame.
· Keep the fastening belts away from the
reach of children.
· The thickness of the mattress must be
such that the vertical height (upper sur-
face of the mattress until the upper edge
of the product’s sides) is at least 200 mm.
Do not use more than one mattress in the
crib.
· If you purchase a mattress separately,
make sure it is suitable for the product.
· The reference mark on the product’s inte-
rior indicates the maximum thickness of
the mattress that shall be used.
· Do not leave any object inside the product
that could reduce its depth.
· Do not position the cot near walls and ob-
stacles to prevent trapping hazards.
· Do not leave small objects inside the prod-
uct to prevent chocking hazards.
· Use only spare parts approved by the
manufacturer. Do not apply accessories to
the product, which are not supplied by the
manufacturer.
· Do not adjust the product with the child
inside.
· Do not move the product with the child
inside.
· Do not use the product with more than
one child at a time.
· The product must be kept away from elec-
tric cables and cords: do not place the
product near windows where cords, cur-
tains or similar objects could pose chock-
ing or strangling hazards for the child.
To avoid strangling hazards, do not give
to your child or place near him, objects
equipped with cords.
· A prolonged exposure to the sun may
cause changes of tones to the product’s
colour. After a prolonged exposure of the
product to high temperatures, wait a few
minutes prior to placing your child in it.
· When not in use, keep the product away
from the reach of children.
· All assembly fittings should always be
tightened properly and that care should
be taken that no screws are loose, be-
cause a child could trap parts of the body
or clothing (e.g. strings, necklaces, ribbons
for babies’ dummies, etc.), which would
pose a risk of strangulation.
COMPONENTS
A. Support leg with wheels
B. Support leg with non-slip feet
C. Central supporting structure
D. Fixing belts
E. Fabric lining
F. Mattress with removable cover
G. Upper tubular structure
H. Upper removable tubular structure
I. Bag
A1) Height adjuster button
A2) Removable structure support
A3) Height indicator
A4) Feet rotation release button
A5) Adjustable feet
A6) Wheels with brake
B1) Non-slip feet
B2) Structure fixing for central support
C1) Fixing pin
C2) Fabric lining fixing button
C3) Grey fixing buckles
D1) Red anchoring buckles
E1) Belt with clip
E2) Pocket
E3) Zip for fabric removal
E4) Zip for co-sleeping opening
E5) Mesh window
E6) Side support for restraint
G1) Leg fixing
H1) Removable tubular structure release button
L) Maximum limit for mattress height
ASSEMBLY OF THE CRIB
1. Hold the support leg making sure that the external tube slides
upwards until you hear the locking CLICK in the first position
(fig. 1). Repeat the same operation with the other support leg.
2. Fix the central supporting structure to the 2 legs as illustrated
in figure 2. The CLICK of the pivot indicates correct fixing of the
structure (fig. 4). WARNING: make sure that the grey buckles
are on the same side as the adjustable feet (fig. 4).
3. Assemble the upper structure and the fabric to the legs, slid-
ing the tube of the leg inside the side pocket of the fabric (fig. 5).
Carry out this operation for both sides.
4. Subsequently fix the upper structure to the legs, inserting the
relative plastic support as illustrated in figure 6. Push down-
wards until you hear the CLICK of correct fixing (fig. 7). Carry
out this operation for both sides.
5. Fix the fabric lining to the central structure, hooking the 2
belts with clips positioned at the bottom of the lining (fig. 8).
6. Position the mattress on the bottom of the crib (fig. 9).
7. Lock the 2 wheels of the crib, lowering the levers that activate
the brakes (fig. 10).
At this point the crib is ready to be used. WARNING: check to
make sure that all of the fasteners have been correctly attached
and that the zips are closed and locked right to the end of their
travel. WARNING: do not use the cot with adjustable feet par-
tially or totally rotated and unlocked (fig. 11). The correct posi-
tion for use is illustrated in figure 12. In the case of accidental
knocks against adjustable feet, return them to the correct posi-
tion by lifting the crib slightly.
HEIGHT ADJUSTMENT OF THE COT
The crib can be adjusted to different height positions. In order
to adjust the height, pull the adjustment lever upwards and lift
the crib to the desired position (fig. 13). Repeat this operation
on the opposite side.
The base of the crib can be inclined slightly by adjusting the 2
legs to different heights (fig. 14). WARNING: the crib can be
inclined with a maximum variance of 2 positions between one
leg and the other (for example: the right leg in position 3 and
the left leg in position 1, see fig. 15). WARNING: The head of the
child should always be positioned on the highest side (fig. 16).
CO-SLEEPING MODE (FIXING TO THE BED)
The crib can be fixed to the parent’s bed (co-sleeping mode).
WARNING – IMPORTANT FOR THE SAFETY OF YOUR CHILD:
this method is only possible with bed types that comply with all
of the conditions described in this paragraph.
In particular the side support of the crib should always be put
close to the parent’s mattress and the mattress should always
be aligned with the height of the side support for restraint of the
crib (see fig. 17). Furthermore, the crib should be firmly fixed
to the structure of the parents bed or to the mattress support
(net or slats).
WARNING: Check to make sure that the crib in the co-sleeping
mode does not interfere with the parent’s bed.
WARNING: During use, make sure that the parents bed sheets,
blankets etc. do not enter and cover the interior of the crib.
8. Open the side of the crib with the window using the side zips
and open them completely (fig. 18).
9. Then press the removable tubular structure release button
and remove partially on one side and then on the other (fig. 19).
Once this operation has been performed on both sides, remove
the tube and fix it to the legs of the structure using the relative
supports (fig. 20). WARNING: use the crib with the tube low-
ered, only in the co-sleeping mode.
10. Move the crib close to the parent’s bed and check the height
of the crib compared with the mattress of the bed. WARNING:
the height of the parent’s mattress should always be more
than that of the side support for containment of the crib (fig.
21). WARNING: in the co-sleeping mode the 2 legs of the crib
should always be adjusted to the same height.
… 19 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Chicco Next 2 Me wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info