644073
16
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
16
Step 3:
Installation of the pedal supports (16) and connecting tubes (24).
1. Place the preassembled unit of the right pedal support (16) and one
connecting tube (24R) at the right hand side of the main frame (1).
(Note: Right is specified as viewed standing on the machine during
training.)
2. Put one wave washer (26) onto the pedal crank (21).
3. Push the connecting tube (24R) onto the axles’ end of handlebar support
(38) and put the pedal holder (16) at the pedal axle (21) at the same time.
Put on the screw (27) a washer 8//32 (13) and tighten the connection
tube (24R) at handlebar post (38) firmly. Then tighten the pedal support
holder (8R) at pedal crank (21) with washer 10//32 (45), spring washer
( 9) and self locking nut (10).
4. Cover nut (10) with a screw cap for M10 (11) and screw (27) with screw
cap for M8 (22).
5. Install the left pedal support (16) incl. all additionally required parts on
the left hand side of the machine as described in 1. – 4.
Step 4:
Installation of pedals (18L+18R) at pedal support (16).
1. Push the right pedal (18L+18R) onto the right pedal holder (16). Adjust
the holes in the parts so that they are aligned.
2. Push the screws (19) from above through the holes. Push on a washer
(14) from the opposite side and screw on a nut (50) and tighten firmly.
(Note: The right and left footrests (18) can be discerned by the edges of
the longitudinal sides of the footrests. The high edges of the footrests
(18) must point inwards (towards the main frame.)
Step 5:
Installation of the hand grips (28) at the connecting tubes (24).
1. Put the handgrip bars (28L+28R) onto the connecting tubes (24) and
adjust the holes in the tubes so that they are aligned.
(Note: the handgrip bars must be aligned after assembly so that the
upper ends are inclined outwards (away from the support (38)).
2. Push the bolts M8x20 (29) through the holes and tighten the handgrip
bars (28) with curved washers 8//19 (49) and spring washers (42) at
connection tubes (24) firmly.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Christopeit AL5 - 1124 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info