Bedienungsanleitung Christopeit AX 4000 (Seite 20 von 64) (Deutsch, Englisch, Holländisch, Französisch)

793199

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite



Program 16 is a Speed Independent Program. Press „F“ key to select

the values of TIME, DISTANCE, CAL. and WATT.

Then, press (+) or (-) key to adjust the values. Aer pressing „START/

STOP“ key to exercise, please also apply the heart rate detector appro-

priately. During the exercise, the level of loading is not adjustable. In

this program, computer will adjust the level of loading according to the

value of WATT setup.

For example, the level of loading may increase while the speed is too

slow. Also, the level of loading may decrease while the speed is too

fast. As a result, the calculated value of WATT will close to the value of

WATT setup by users. Set exercise parameters with F-key for Time/Dis-

tance/Calories and Pulse.



Program 17 to Program 20 are the Heart Rate Control Programs. In Pro-

gram 17 to Program 19, press „F“ key to select TIME, DISTANCE, CAL.

and AGE. Then, press (+) or (-) key to adjust the values. Users may exer-

cise in a period of me or a certain distance with 55% Max Heart Rate

in Program 17, 75% Max Heart Rate in Program 18, and 95% Max Heart

Rate in Program 19. Aer pressing „START/STOP“ key to exercise, plea-

se also apply the heart rate detector appropriately. In these programs,

the computer will adjust the level of loading according to the heart

rate detected. For example, the level of loading may increase while the

heart rate detected is lower than TARGET H.R. Also, the level of loading

may decrease while the heart rate detected is higher than TARGET H.R.

As a result, the user’s heart rate will be adjusted to close the TARGET

H.R. in the range of TARGET H.R. –5 and TARGET H.R. +5. With the input

of age, the computer may suggest a target heart rate toexercise. The

suggested heart rate is 80% (220 – age).

So, if the heart rate detected equals to or greater than the TARGET

H.R., the value of HEART RATE will keep ashing. Please note that it is a

warning for users to slow down or to lower the level of loading.

In program 20, press „F“ key to select TIME, DISTANCE, CAL. and TAR-

GETH.R. Users may setup a target heart rate to exercise in a period of

me ora certain distance.



In non-exercising status, press F-key to enter body fat parameters set-

ngs. You can set from the below sequence: User No. (1 - 8), height

(120-250CM), gender, age (10-99), weight (20-200KG). Press F-key to

proceed to next parameter seng. Press + key to increase the seng

value while press - key to decrease. When you nish seng, press

START/STOP key and hold the pulse sensor. Then the display will show

your body fat data and your individual body fat program in 10 seconds.

Press START/STOP again to exit body fat test and press again to start

exercising this program.



PROGRAM MANUAL is a manual program. Press „F“ key to select TIME,

DISTANCE or CAL.. Then, press (+) or (-) key to adjust the values. The

default level of loading is 6.

Aer pressing „START/STOP“ key to exercise, please also apply the he-

art rate detector appropriately. Users may exercise in any desire level

(by pressing (+) or (-) during the workout) with a period of me or a

certain distance.



TIME Control: Sets up a period of me to exercise. (5-99Min.)

DISTANCE Control: Sets up a certain distance to exercise. (1-999km)

CALORIE Control: Sets up certain calories to exercise. (10-990kcal)

Set exercise parameters with F-key for Time/Distance/Calories

and Pulse.



PROGRAM 1 to PROGRAM 10 are the preset programs. Press „F“ key to

select TIME, DISTANCE or CAL. Then, press (+) or (-) key to adjust the

values. Users may exercise with dierent level of loading in dierent

intervals as the proles show. Aer pressing „START/STOP“ key to exer-

cise, please also apply the heart rate detector appropriately. Users may

also exercise in any desire level (by pressing (+) or (-) during the work-

out) with a period of me or a certain distance. Set exercise parame-

ters with F-key for Time/Distance/Calories and Pulse.



Program 11 to Program 15 are the user-seng programs. Users are

free to edit the values in the order of TIME, DISTANCE, CAL. and the le-

vel of loading in 10 intervals.

The values and proles will be stored in the memory aer setup. Aer

pressing „START/STOP“ key to exercise, please also apply the heart rate

detector appropriately. Users may also change the ongoing loading in

each interval by pressing (+) or (-) key, and they will not change the le-

vel of loading stored in the memory. With the input of age, the com-

puter may suggest a target heart rate to exercise. The suggested heart

rate is 80% (220 – age). So, if the heart rate detected equals to or grea-

ter than the TARGET H.R., the

value of HEART RATE will keep ashing. Please note that it is a warning

for users to speed down or to lower the level of loading. Set exercise

parameters with F-key for Time/Distance/Calories and Pulse.





Gender/Age Underweight Healthy Slightly Over-

weight Overweight Obese

Männlich/ ≤ 30 < 14% 14%~20% 20.1%~25% 25.1%~35% > 35%

Männlich/> 30 < 17% 17%~23% 23.1%~28% 28.1%~38% > 38%

Weiblich/≤ 30 < 17% 17%~24% 24.1%~30% 30.1%~40% > 40%

Weiblich/ > 30 < 20% 20%~27% 27.1%~33% 33.1%~43% > 43%

Christopeit AX 4000 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info