Bedienungsanleitung Christopeit E 2000 (Seite 21 von 68) (Deutsch, Englisch, Holländisch, Französisch)

793035

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

RPM and Power in Wa of Level 1 - Level 24 for E 2000

Art.-Nr. 2002



1.The power consumpons (Wa) are adjusted by measuring the dri-

ving speed (min-1) of axle and the braking torque (Nm).

2.Your equipment was tested to fulll the requirements of its accuracy

classicaon before shipment, If you have doubts about the accuracy,

please contactwith your local retailer or send it to accredited test labo-

ratory to ensure or calibrate it.

(Please note that a deviaon tolerance as noted on page 14, is permis-

sible.)

WATT TABELLE

PULSE RATE NOTE

LEVEL 20 RPM

WATT

30 RPM

WATT

40 RPM

WATT

50RPM

WATT

60 RPM

WATT

13711 17 38

25 11 18 27 48

36 14 23 38 58

49 20 32 50 68

511 23 40 65 78

613 28 47 77 88

715 33 56 88 98

817 38 65 100 108

919 42 72 110 118

10 22 46 79 120 128

11 23 50 87 132 138

12 26 56 95 140 148

13 27 59 101 152 158

14 28 62 106 162 168

15 31 67 115 175 178

16 33 72 125 185 188

17 38 80 134 192 198

18 42 88 145 200 208

19 48 95 152 208 218

20 56 102 160 219 228

21 62 111 168 230 238

22 71 120 181 239 248

23 78 129 190 251 258

24 83 140 200 260 268

1. Hand pulse measurement:

On the le and right handlebar grip part two metal contact plates are

insert as pulse sensors. Please take care that both hands at the same

me in normal force on the sensors. During the heartbeat measure-

ment a heart symbol ashes next to the pulse display. (The hand pulse

measurement serves only for orientaon, as it is caused by movement,

fricon, sweat etc. it can come to deviaons from the actual pulse.

A few people may cause malfuncons of hand pulse measurement.

Should you have trouble with the hand pulse measurement, we recom-

mend the use of a cardio chest belt.)

„WARNING“ Heart rate monitor systems may be inaccurate. Excessive

exercising can lead to serious damage or maybe to death. If dizziness or

weakness is felt, stop exercising immediately.

2. Cardio - Pulse Measurement:

On the market, cardio pulse measurements are available, which consist

of a transmier chest belt and a watch receiver or only chest belt. The

computer of your crosstrainer has build in receiver (without sender)

and with using a suitable chest belt for cardio pulse measurement the

computer can show the pulse data. This works with all un-coded chest

belts with transmission frequency is between 5.0 - 5.5 kHz. The range

of the transmiers depends on the model approx.. 1m. (Christopeit-

Sport Pulsebelt: 9309)

ATTENTION: If both pulse measuring methods are used simultaneously

Hand pulse measurement takes precedence.

1. Operaonally, the ergometer with generator has got in dierent

speeds a lile more or less rough construcon noise, which is normal.

2. Keep moisture away from computer.

3. The USB port socket on side of the computer can use for charging of

small devices during exercising. The loading data are 5V / 0.35A-1A

4. An accumulator pack with 6V/1300mAh is located in the accu com-

partment at backside of computer. For replacement, open the accu

compartment, remove the accu pack, disconnect and replace it with an

idencal model. The lifeme of accu depends on the charging frequen-

cy. (Maximum buering of the display approx. 80 sec.)



When selecng the program, select the WATT category using the +/-

keys and conrm with the F -key. Calling up the default opons WATT /

TIME / DISTANCE / CALORIES / PULSE by pressing the F -key and seng

the values using the +/- keys. The default seng for the WATT value is

100, the value can be changed from 10 to 350 was in 5 wa steps. The

WATT value is set with the +/- keys. The entered WATT value remains

independent of the pedal speed constant through automac adjust-

ment of resistance. Use the START/STOP -key to start the wa program.

5. PERSONAL: individual programs:

When selecng the program, select the PERSONAL category using the

+/- keys and conrm with the F -key. Create your own program prole.

With this program you can determine the resistance of each secon

(16 bars) yourself. Set the desired resistance for the rst bar using the

+/- keys and conrm the entry using the F -key. Proceed in the same

way for all 16 bars and start the program aer the last bar entry using

the START/STOP -key. Call up the preset opons TIME / DISTANCE / CA-

LORIES / PULSE by interrupng the program with the START/STOP -key,

press the F -key to call up preset funcons. Set the values using the +/-

keys. The set program prole is saved automacally. (U0 can be set in

the same way as U1 ~ U4, only this data cannot be saved.)

6. H.R.C .: pulse programs

When selecng the program, select the H.R.C. category using the +/-

keys and conrm with the F -key. The pulse programs 55%, 75% and

90% are based on the age input of the respecve user (U0-U4) and use

this to calculate the upper pulse limit 55%, 75% or 90% of the maxi-

mum heart rate value. For the target heart rate program, enter the de-

sired upper heart rate limit directly using the +/- buons.

The PULSE display ashes as soon as the upper pulse limit is reached

during training.

55% -- DIET PROGRAM

75% -- HEALTH PROGRAM

90% -- SPORTS PROGRAM

TAG—USER SET TARGET HEART RATE

TEST (RECOVERY):

When you have nished your workout, press Test-key. For RECOVERY to

funcon correctly, it needs your Heart Rate input. TIME will count down

from 1 minute and then your tness level from F1 to F6 will be display-

ed. (See table under Fitness Test Program). NOTE: During RECOVERY,

no other displays will operate. If the baery is not fully charged, this

test funcon would have to be accompanied by a slight pedaling move-

ment.

Christopeit E 2000 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info