Bedienungsanleitung Christopeit FXM 2 (Seite 28 von 68) (Deutsch, Englisch, Holländisch, Französisch)

793196

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Cleaning, Checks and Storage of the Ergometer

bike:

1. Cleaning

Use only a less wet cloth for cleaning. Caution: Never use benzene,

thinner or other aggressive cleaning agents for surface cleaning as

this damage caused.

The device is only for private home use and for use suitable indoors.

Keep the unit clean and moisture from the device.

2. Storage

Plug out the power supply unit while intending the unit for more than

4 weeks not to use. Choose a dry storage in-house and put some

spray oil at front & rear foot tube connection point and hand grip

axle. Cover the bike to protect it from being discolor by any sunlight

and dirty through dust.

3. Checks

We recommend every 50 hours to review the screw connections for

tightness, which were prepared in the assembly. Every 100 operating

hours, you should put some spray oil at front & rear foot tube con-

nection point and hand grip axle.

Troubleshooting

If you cannot solve the problem with the following information,

please contact the authorized service center.

Problem Possible Cause Solution

Computer has

no value at Dis-

play if you press

any key.

No power

adapter is well

plugged or wall

power is without

power.

Check that the power adapter

is properly plugged in, possibly

with another electric device

check if the wall power is ﬁne.

Computer is

not counting

data and do not

switch on after

start cycling.

Sensor impulse

missing base on

not well plugged

connection

Check the plug connections at

computer and inside of handle-

bar support.

Computer is

not counting

data and do not

switch on after

start cycling.

Sensor impulse

missing base on

not correct posi-

tion of sensor.

Take off the cover and check

the distance between magnet

and Sensor. The magnet at

turning belt wheel should have

only less than < 5mm distance

against the sensor position.

No pulse value Pulse cable is

not plugged in.

Check the separately pulse

cable is well connected with

computer. Check the connec-

tions of the pulse cable.

No pulse value Pulse sensors

not well connec-

ted

Screw out the screw for pulse

measurement and check if

plugs are well connected and no

damage at pulse cable.

If you notice during training that the values which must be displayed by

the computers appear irregularly or the symbol “P” appears in the display,

conduct the following check procedure:

a. Check that the strap is not too loose and/or has slipped too far down-

wards.

b. Check whether the Christopeit-sport Brand on the transmitter of the pul-

se measuring unit is positioned correctly and is legible to a person looking

at the person in training.

c. Ensure that the computer is switched on.

d. Moisten the part of the strap neat the transmitter and which comes into

contact with the skin lightly with water to improve the transmission.

e. Check whether the battery in the transmitter is spent and change this

if necessary.

f. Remove and replace the batteries.

If you use both pulse measurements (you wear the pulse belt and put

the hands onto hand pulse sensors) the display will show the value of

hand pulse sensors.

Don’t forget to press Start-key to start pulse measurement.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Christopeit FXM 2 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info