588931
15
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
15
When the heart rate transmitter has not been initialized yet, the initialization can be started now. It is
important that first the speed transmitter will be activated: this happens by wearing the belt or by short
and simultaneous rubbing (preferably with the thumb) on the electrodes (corrugated rubber parts left
and right from the hard transmitting device on the chest belt).
By shortly pressing the
MR-button you confirm (please only after activating the transmitter).
The display now shows briefly a percentage number and will go back after successful initialization to the
options menu (display shows ”HEART“ highlighted).
If the initialization is not successful, the percentage number goes to 100% and the
HAC5 will display
“Iniscan Error“.
Then activate the transmitter again and start the initialization again with “retry“ (select with
LR-button
and confirm with MR-button). With “cancel(select with LR-button and confirm with MR-button) the
initialization function can be left (HAC5 shows again the options menu).
Ski SPD
Here the speed measurement during skiing and snowboarding can be switched on or off.
The speed will be measured accordingly to the current decline (height difference).
Select with
MR-button,
the measurement can then be switched on or off with the
UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
Note: Upon switching on e.g. the ski speed measurement in one profile and RDS at the same time, the
ski speed measurement will be internally switched off (according to the height difference) and the speed
will be measured with RDS II.
Altimeter
Here the function “altimetry“ can be switched on or off.
Select with
MR-button,
the altimetry can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
Beeper
The beep sounds and the acoustic heart rate alarm can here be switched on or off.
If the heart rate alarm has been switched on, the alarm symbol will appear to the left in the display.
Select with MR-button,
the function can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
In the normal operation mode the heart rate alarm can be switched on or off anytime by pressing the
UL-button for 3 sec.
Ascent
Here the function “ascending/descending display“ can be switched on or off.
Select with MR-button,
then the function can be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu appears again.
Vario
Here the function “ascend/descend“ can be switched on or off.
Select with MR-button,
the function can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
STW
Here the function “stop watch“ can be switched on or off.
Select with MR-button,
the function can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
Countdown
Here the function “countdown“ can be switched on or off.
Select with MR-button,
the function can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu appears again.
Power
Here the function “power“ can be switched on or off.
Select with MR-button,
the function can then be switched on or off with the UR-/LR-button.
By pressing the MR-button again the set value will be saved and the setting menu reappears.
Ski SPD
Altimeter
12 %
Iniscan HR
Bike1
retry
Iniscan Error
cancel
Iniscan Error
Fehler bei der Initialisierung
Beeper
Ascent
Vario
STW
Countdown
Power
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ciclo HAC 5 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Ciclo HAC 5

Ciclo HAC 5 Zusatzinformation - Deutsch - 4 seiten

Ciclo HAC 5 Kurzanleitung - Deutsch - 2 seiten

Ciclo HAC 5 Bedienungsanleitung - Deutsch - 38 seiten

Ciclo HAC 5 Zusatzinformation - Englisch - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info