Bedienungsanleitung Ciclo HAC 5 (Seite 13 von 38) (Englisch)

588931

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

6. Main setting mode

By pressing the MR-button for 3 sec. the main setting mode will be selected. By pressing the MR-

button again for 3 sec. the setting mode can be left from any area (except during the PC transmission,

display “PC-Connect“).

Note: When leaving the main setting mode with

MR-Button for 3 sec. the last displayed choice will not

be saved (saving only by pressing the MR-button shortly).

The specific options can be accessed by shortly pressing the LR-/UR-button

and be selected by shortly pressing the

MR-button.

The desired setting can be selected by the

LR-/UR-button

and be confirmed with the MR-button.

6.1 Short menu (Topical)

Whereas most settings have to be set only once, there are some values which have to/should be

adjusted constantly. These values can be selected and modified and set in the short menu.

Attention: during recording settings can only be changed in the short menu.

By accessing normal setting mode (via MR-button 3 sec.) and selecting a profile, recording will be

turned off automatically.

The short menu includes the following values/functions

(dependent on whether the functions have been activated in the particular profiles):

Options: LR-/UR-button

Saving and back: MR-button

Cancel: Push MR-button 3 sec.

6.2 Profile Bike and profiles RDS, ALPIN, RUN

Here first select the desired profile and then you can switch on or off the desired functions for the parti-

cular profile and furthermore the particular transmitters can be initialized.

Settings for the profiles

Since the settings for the profiles repeat themselves, all possible settings are listed, it depends on the

particular profile if they appear.WEIGHT

Here you can enter the material’s weight (e.g. bicycle, backpack etc.).

Parameters: Min: 0 kg

Max: 100 kg

Standard: 10 kg

Select with MR-button,

the desired weight can then be set with the LR-/UR-button.

By pressing the MR-button again the set value will be saved and the setting menu appears again.

CIRCUM

The wheel circumference can be set here.

Parameters: Min: 500 mm

Max: 3000mm

Standard: 2080 mm

Select with MR-button,

the desired wheel circumference can then be set with the LR-/UR-button.

By pressing the MR-button again the set value will be saved and the setting menu appears again.

Topical

Prof.Bike

RDS.Run.Alp

HR-Interval

CAD-Interval

Basic Set.

PC-Connect

Powerdown

Exit

Set Altitude

Set DST

IN-Zone

HR-Target

Set Countdown

Set Alarm

Zone2

Exit

Profile Bike and profiles

RDS, ALPIN, RUN

Einstellungen

für die Profile

WEIGHT

Short menu (Topical)

CIRCUM

Size Circumference

40-559 26 x 1,5 2026 mm

44-559 26 x 1,6 2051 mm

47-559 26 x 1,75 2070 mm

50-559 26 x 1,9 2026 mm

54-559 26 x 2,00 2089 mm

57-559 26 x 2,125 2114 mm

37-590 26 x 1 3/8 2133 mm

32-620 27 x 1 1/4 2199 mm

40-622 28 x 1,5 2224 mm

47-622 28 x 1,75 2268 mm

40-635 28 x 1 1/2 2265 mm

37-622 28 x 1 3/8 2205 mm

20-622 700 x 20C 2114 mm

23-622 700 x 23C 2133 mm

25-622 700 x 25C 2146 mm

28-622 700 x 28C 2149 mm

32-622 700 x 32C 2174 mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo HAC 5 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo HAC 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info