Bedienungsanleitung Ciclo HAC 5 (Seite 14 von 38) (Englisch)

588931

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

SPD

Here the function “speed measurement“ can be switched on and off.

Select with MR-button,

Then the speed measurement can be switched on or off with the LR-/UR-button.

Upon switching on the speed measurement, the display for initializing appears after pressing the

MR-

button (for saving the setting).

When the speed transmitter has not been initialized yet, the initialization can now be started here. It is

important that the speed transmitter will be activated first: this can be done by short (careful) hitting the

marking on the transmitter with the circle magnet or (in case it has already been installed) by turning the

wheel a few times (so the magnet will pass the transmitter activating it).

By shortly pressing the

MR-button you confirm (please only after activating the transmitter).

The display now shows briefly a percentage number and will go back after successful initialization to the

options menu (display shows “Speed“ highlighted).

If the initialization is not successful, the percentage number goes to 100% and the

HAC5 will display

“Iniscan Error“.

Then activate the transmitter again and restart the initialization with “retry“ (select with LR-button and

confirm with

MR-button). With “cancel“ (select with LR-button and confirm with MR-button) the initiali-

zation function can be left (HAC5 shows the options menu again).

Cadence

Here the function “pedal frequency measurement“ can be switched on or off.

Select with

MR-button,

then the pedal frequency measurement can be switched on or off with the UR-/LR-button.

If the pedal frequency measurement is switched on, the display for initialization appears on the display

after pressing the

MR-button (for saving the setting).

When the pedal frequency transmitter has not been initialized yet, the initialization can be started now.

It is important that first the speed transmitter will be activated: this happens by short (careful) hitting the

marking on the transmitter with the circle magnet or (in case it has already been installed) by turning the

crank a few times (so the magnet will pass the transmitter activating it).

By shortly pressing the

MR-button you confirm (please only after activating the transmitter).

The display now shows briefly a percentage number and will go back to the options menu after suc-

cessful initialization (display shows “CAD“ highlighted).

If the initialization is not successful, the percentage number goes to 100% and the HAC5 will display

“Iniscan Error“.

Then activate the transmitter again and start the initialization again with “retry“ (select with

LR-button

and confirm with MR-button). With “cancel“ (select with LR-button and confirm with MR-button) the

initialization function can be left (

HAC5 shows again the options menu).

RDS

Here the speed measurement can be switched on or off using the accessory RDS II (Radar Distance

System – optionally available at your dealer).

Select with

MR-button,

the speed measurement can then be switched on or off with the UR-/LR-button.

If the speed measurement is switched on, the display for initialization appears on the display after pres

sing the MR-button (for saving the setting).

Before initializing the RDS II must be switched on to transmit a signal which the HAC5 can receive.

By pressing the MR-button shortly you confirm (please only after activating the transmitter).

The display now shows briefly a percentage number and will go back after successful initialization to the

options menu (display shows “RDS“ highlighted).

If the initialization is not successful, the percentage number goes to 100% and the HAC5 will display

“Iniscan Error“.

Then activate the transmitter again and restart the initialization with “retry“ (select with

LR-button and

confirm with

MR-button). With “cancel“ (select with LR-button and confirm with MR-button) the initiali-

zation function can be left (HAC5 shows again the options menu).

Heart

Here the function “heart rate measurement“ can be switched on or off.

Select with

MR-button,

then the heart rate measurement can be switched on or off with the UR-/LR-button.

Upon switching on the heart rate measurement, the display for initializing appears after pressing the

MR-button (for saving the setting).

SPD

12 %

Iniscan SPD

Bike1

retry

Iniscan Error

cancel

12 %

Iniscan CAD

Bike1

retry

Iniscan Error

cancel

Iniscan Error –

Fehler bei der Initialisierung

Iniscan Error –

Fehler bei der Initialisierung

Cadence

RDS

Iniscan Error –

Fehler bei der Initialisierung

12 %

Iniscan RDS

RDS

retry

Iniscan Error

cancel

Heart

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo HAC 5 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo HAC 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info