Bedienungsanleitung Citronic MPSD-2 (Seite 5 von 20) (Englisch)

455896

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

11. CHANNEL EQUALIZER – All of the channels include a two-band signal EQ. These controls are used to

increase or decrease the LOW and HIGH of the output signal. (only available when MIXER OUTPUT is ON)

) HIGH frequency control

This knob is used to adjust the high levels of a channel allowing for a maximum high gain of 10dB or maximum

decrease of –26dB. Turning the knob in a counterclockwise direction will decrease the amount of high

applied to a channel signal, turning the knob in a clockwise direction will increase the amount of high applied

to a channel signal.

) LOW frequency control

This knob is used to adjust the low levels of a channel allowing for a maximum bass gain of 10dB or maximum

decrease of –26dB. Turning the knob in a counter- clockwise direction will decrease the amount of low

applied to a channel signal, turning the knob in a clockwise direction will increase the amount of low applied

to a channel signal.

12. IN BUTTON – This function allows you to set a CUE POINT without music interruption (“on the fly”). This

button also sets the starting point of a seamless loop.

13. OUT BUTTON – This button is used to set the ending point of a loop. A loop is started by pressing the IN

BUTTON. Pressing the OUT BUTTON set the loop ending point. The loop will continue to play until the

OUT BUTTON is pressed once again.

14. HEADPHONE JACK – This jack is used to connect your headphones to the mixer allowing you to monitor

the cue source. Always be sure the CUE LEVEL VOLUME is set to minimum before you put the

headphones on.

15. CUE PAN CONTROL – This functions allows you to monitor the CUE level as well as the Program (main

output) level in your headphones. When you turn the CUE PAN to the full left position, you will only hear

the player signal you playing, on the contrary you will only hear the output signal of the mixer. If the CUE

PAN KNOB is set to the center position, you can cue both the player signal you playing and the output

signal.

16. CUE VOL CONTROL – This knob is used to adjust the headphone volume output level. Turn the knob in a

clockwise direction to increase the headphone volume.

17. PITCH ON/OFF BUTTON –This button has two functions as below:

y This button is used to turn the PITCH SLIDER function on and off. The pitch percentage can be changed

between 4%, 8%, and 16%. 4% will allow the least amount of pitch manipulation and 16% will allow the

most amount of pitch manipulation.

y Press and hold this button for more than 2 seconds to switch the TEMPO LOCK function on/off.

18. PITCH RANGE SELECTOR – Press this button to choose any pitch range percentages of 4%, 8%, and 16%.

19. TRACK KNOB – This knob is used to scroll backward and forward through tracks. Pushing this knob and

turning it at the same time will let you scroll forward or backward 10 tracks per "click" of the knob. Also,

when you press the knob it will toggle between artist, bitrate, title name, genre, and file name of the current

song playing out of the Player.

20. FOLDER KNOB – This knob serves 2 functions depending on which mode you are working in.

(1) Press the FOLDER KNOB will show folder name of the current song playing out of the Player.

(2) Turning the knob will scroll through the folders found on a memory device.

21. BPM/TAP BUTTON – This button is used to override and manually set a track BPM. Occasionally the

built-in BPM meter may not function as desired. This button allows you to override the internal beat clock

and manually set a track BPMs. To manually set the BPMs; tap this button a few times to a tracks heavy

down beat, the unit will automatically calculate your tapping and translate it into a tracks BPMs. The BPM

READOUT is then displayed in the LCD. To return to the automatic BPM counter, press and hold down the

TAP BUTTON for at least 2 seconds and then release.

22. SEARCH BUTTON – This button has two functions:

 SEARCH function: Press this button to toggle between fast search (LED lit) and slow search (LED off).

The fast search will automatically turn off if the jog Wheel is not used for more then 10 seconds.

SEARCH mode on – When the SEARCH function is activated you can use the jog Wheel to search

fast backward or forward through the current track whether in play mode or not.

SEARCH mode off – When the SEARCH function is not activated, you can use the jog Wheel to search

frame by frame or a slow search in pause mode and you can use the JOG WHEEL act as a PITCH BEND in

play mode.

 Enter the SETUP MENU: Press the SEARCH button for more than 2 seconds to enter system setting mode.

CONTROLS AND FUNCTIONS TOP PANEL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Citronic MPSD-2 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info