Bedienungsanleitung Clarion FZ502E (Seite 6 von 16) (Englisch)

580546

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

English

FZ502E

System Setup System Setup

2. Press and hold the [CONTROL] knob to

conrm.

DISCON (BT mode)

Disconnect currently connected mobile

phone.

1. Rotate the [CONTROL] knob, mobile

phone displays are currently connected.

2. Press and hold the [CONTROL] knob to

disconnect.

MIC GAIN (BT mode)

Rotate the [CONTROL] knob to choose Mic

gain: -5,-4,-3,-2,-1,0,1,2,3,4,5.

You can change the gain of MIC when a

telephone partner cannot hear your voice.

MIC SEL (BT mode)

Rotate the [CONTROL] knob to choose

microphone EXTERNAL or INTERNAL.

TONE SEL (BT mode)

You can get mobile phone ring tone from the

speaker.

Rotate the [CONTROL] knob to choose

AUTO or INTERNAL.

• AUTO:

Mobile phone ring tone from the speaker.

• INTERNAL:

The unit original ring tone from the speaker.

AUTO CON (BT mode): ON/OFF

Rotate the [CONTROL] knob to choose

AUTO CON ON or OFF.

AUTO ANS (BT mode)

To answer incoming calls automatically.

Rotate the [CONTROL] knob to choose

AUTO ANS ON or OFF.

PIN CODE

This CODE is requi red to pairin g for

bluetooth.

Press the [CONTROL] knob, rotate the

[CONTROL] knob to select a digit, press the

[CONTROL] knob (left / right) to move the

cursor.

Press and hold the [CONTROL] knob to

conrm.

The PIN CODE default setting is “ 0000 “.

SCRN SVR: ON/OFF

Rotate the [CONTROL] knob to choose

SCRN SVR (screen saver) ON or OFF.

SCROLL: ON/OFF

For track information that is longer than the

display panel:

When SCROLL is ON, the LCD will display

ID3 TAG information cyclely, e.g.: TRACK-

>FO L D E R ->FI L E - > ALB U M - > TITL E -

>ARTIST->TRACK->...

When SCROLL is OFF, the LCD will display

one of the ID3 TAG information, the default

is TRACK, but user can adjust it to other ID3

TAG information by pressing [DISP] button

on the remote control.

DIMMER: ON/OFF

Rotate the [CONTROL] knob to choose

DIMMER ON or OFF.

• ON: LCD dimmer is active when small

light of vehicle is turned ON.

• OFF: LCD always maximum brightness

regardless of the vehicle small light.

REAR/S-W

Rotate the [CONTROL] knob to choose

REAR or S-WOOFER (SUB-WOOFER).

SW PHASE

Rotate the [CONTROL] knob to choose

SUB-WOOFER phase R E V E RSE or

NORMAL.

BEEP

Rotate the [CONTROL] knob to choose

beep sound ON or OFF.

TEL-SW

Rotate the [CONTROL] knob to choose

MUTE, ON or OFF.

• MUTE:

The sound from this unit is muted during

telephone calls.

• OFF:

This unit continues normal operation even

when the cellular phone is used.

• ON:

You can listen to your telephone calls from

the speakers connected to this unit.

SOUND

Press the [CONTROL] knob to choose

SOUND. First press shows current EQ.

Rotate the [CONTROL] knob to choose

BEAT EQ in this order:

OFF -> B-BOOST -> IMPACT -> EXCITE ->

CUSTOM

To change CUSTOM setting, and press

the [CONTROL] knob (center), then press

[CONTROL] knob (right/left) to select EQ

effects including: BASS-G -> BASS-F ->

BASS-Q -> MID-G -> MID-F -> MID-Q

-> TREBLE-G -> TREBLE-F, rotate the

[CONTROL] knob to select a value.

BASS-G / MID-G / TREBLE-G: (-7)- (+7)

BASS-F: 50 / 100 / 200

BASS-Q : 0.7 / 1.0 / 1.4 / 2.0

Audio Setup

MID-F: 500 / 1 K / 2 K

MID-Q: 0.7 / 1.0 / 1.4 / 2.0

TREBLE-F: 5 K / 10 K / 15 K

TREBLE-Q: 0.7 / 1.0 / 1.4 / 2.0

Then press the [CONTROL] knob (left /

right) to select USER preset including:

B A L A N CE - > F AD E R - > M -B E X

->HPF(high pass filter) -> LPF(low pass

filter) -> S-W VOL (Subwoofer Volume),

rotate the [CONTROL] knob to select a value.

BALANCE:LEFT 1-7->CENTER->RIGHT

1-7

FADER:FRONT 1-7->CENTER->REAR 1-7

M-B EX: ON/OFF

HPF: THROUGH/60/90/120

LPF: THROUGH/60/90/120

SUBW VOL: (-6)-(+6)

* When listening to your calls on your car

speakers, you can adjust the volume by

turning the [CONTROL] knob.

BLINKING

Rotate the [CONTROL] knob to choose

BLINKING light ON or OFF.

CODE: Setting the anti-theft function

(CATS)

“CATS” is the acronym of “Clarion Anti-Theft

System”. When you set a PIN code (called

as “Personal Code”), a theft is prevented by

disabling the operation of the unit at the theft.

Once you set this code, this function will not

be deactivated unless you delete this code.

Press the [CONTROL] knob, rotate the

[CONTROL] knob to select a digit, press the

[CONTROL] knob (left / right) to move the

cursor. Press and hold the [CONTROL] knob

to conrm.

The procedure to delete this code is same as

the way of setting the code.

Notes:

• Write down your Code in case you forget

it.

• If you have lost your Personal Code,

please contact Clarion customer service.

• The CODE screen will be displayed

when turning the ACC power on after

performing the following operations:

• The car battery was replaced.

• The backup power was cut off.

• The RESET button was pressed.

• When you enter a wrong Personal Code,

the message “LOCK - - - -” is displayed

and the Personal Code entry is prohibited

for a while.

This prohibited time is changed according

to the number of times of wrong code

entry as follows:

• 1 to 6 times: 15 seconds

• 7 times or more: 15 minutes

S-CTRL (iPod mode) : ON/OFF

Rotate the [CONTROL] knob to choose

S-CTRL (Simple control) ON or OFF.

* Refer to P8.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion FZ502E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion FZ502E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info