802927

Concept VP8370 Seite 19

19
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
ENEN
3736 VP8370VP8370
29VP9181
EN
CLEANING AND REPLACING THE AIR OUTLET FILTER
1.Opentheairoutletgridintheappliance‘srearsection(Fig.5).
2. Removetheairoutletlter.Thistypeofvacuumcleanerisequippedwitha
H.E.P.A.lterintheoutlet,whichiscapableofcatchingevenverynedust
particles.Youcancleanthislterbytappingit,thenbrushingitwithasoft
brush.Afterthisoperationiscomplete,youmaycleanaverydirtylterby
washingandbrushingwithasoftbrushinlukewarmwaterwithnocleaning
agentsadded.Itisimportanttoletthewetpartsdrythoroughly.Awetlter
willbedamagedbyvacuuming!Donotuseahairdryertodryit!
Note: Wet cleaning may cause more wear and tear of the lter and,
consequently,mayshortenitsservicelife.
3. Insertthecleanedornewairoutletlterintotheapplianceandclosetheair
outletgrid.
TROUBLESHOOTING
Problem Cause Solution
Motordoesnotrun.
Pluginsertedintothemainsoutlet
incorrectlyorinsuciently. Checktheplugconnection.
Themainsoutletisnotlive. Checkforvoltage,e.g.byconnecting
anotherappliance.
Motorhasstopped
operating.
Improperorinsucientairow.Motor
overheatingfuseactivated.
Disconnect the cable from the socket.
Checkandreleasetheairsuction
anddischargeholes;checkthelter’s
cleanlinessand/orreplacethedustbag.
Letthevacuumcleanercooldown.
Frontcovercannotbe
closed Dustbaginsertedincorrectly. Checkthedustlterinstallation.
Reducedsuctionpower
Dustbagfullorclogged. Replacethedustbag.
Obstructedlter. Cleanorreplacethelter.
Cloggednozzle,tube,orhose. Checkandcleartheairpassageonthe
suctionanddischargesides.
Vacuumcleanerheats
up Slightheatingofthevacuumcleanerisnormalandcannotbeconsideredafailure.
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
SMS dust bags (5 units + 2 units of motor lters) Order code sms9000 Priced according to the valid price list
Fabric dust bag, 1 Ord. No. ts9180 Price according to the applicable price list
Motor lter Order code44290910 Price according to the valid price list
H.E.P.A. air outlet lter Order code 44290911 Priced according to the valid price list
(Fig.5)
29
VP8110, VP8111, VP8112
EN
(Fig. 5)
CLEANING AND REPLACING THE AIR OUTLET FILTER
1. Open the air outlet grid in the appliance‘s rear section (Fig. 5).
2. Remove the air outlet lter. You can clean this lter by tapping it, then brushing it
with a soft brush. After this operation is complete, you may clean a very dirty lter by
washing and brushing with a soft brush in lukewarm water with no cleaning agents
added. It is important to let the wet parts dry thoroughly. A wet lter will be dam-
aged by vacuuming! Do not use a hair dryer to dry it!
Note: Wet cleaning may cause more wear and tear of the lter and, consequently,
may shorten its service life.
3. Insert the cleaned or new air outlet lter into the appliance and close the air outlet
grid.
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
SMS dust bags (5 units + 2 units of motor lters) Order code sms9000 Priced according to the valid price list
Fabric dust bag, 1 Order code 44291711 Price according to the applicable price list
Motor ler Order code 44291704 Price according to the valid price list
28 VP9181
EN
CHECKING THE DUST COLLECTION BAG FILL
Whenthedustcollectionbagllindicatorturnsredduringoperation,replacethefulldustcollectionbagimmediately.
Ifthedustcollectionbagllindicatorisstillredafterthebaghasbeenreplaced,thismaybeduetoseveralcauses:
-someoftheairpassages(hoses,telescopictube,suctioninlet,brushadapter,orotheradapters)areobstructed;
-themotorlterisdirty;
-theairoutletlterisdirty.
Checkfor eachofthepossiblecausesaboveandeliminatetheproblembeforeyou startvacuuming.If thecauseofthe
problemcannotbeidentied,handover theproductto thenearestservicecentre.Neverusethevacuumcleanerifthe
baglevelindicatoriscompletelyredduringoperation.Themotorcouldbedamagedirreparably
CLEANING AND MAINTENANCE
You may clean the accessories and the appliance with a wet cloth. Never immerse
the appliance in water! Do not use any aggressive substances for cleaning, such as
solvents or abrasives!
REPLACING THE DUST COLLECTION BAG
1. Unplug the product from the mains. Disconnect the hose from the suction inlet
and open the appliance cover.
2. Push the ap on the dust retention bag holder; remove the used dust retention
bag (Fig. 3). Dispose of a paper or SMS dust collection bag. Be careful not to tear
the bag when handling. If the bag is made of fabric, empty it and close it
carefully - it can be used repeatedly.
3. Insert a new or empty dust retention bag by tting the plate in the bag holder. The
bag opening must be aligned with the hose hole in the appliance cover.
4. Never use the vacuum cleaner without the dust bag installed! If you forget to
insert the dust retention bag or you insert it incorrectly, the appliance‘s motor
may become damaged.
5. Close the cover. Press until you hear a click.
REPLACING FILTERS
• The lters should be cleaned or replaced when they are visibly dirty, or if the
appliance‘s suction power is reduced. Always check the lters after using the
appliance.
• In order to avoid damage to the appliance, do not use it with incorrectly installed
lters.
• Before replacing the lters, disconnect the appliance from the electrical socket.
• You can buy suitable types of lters from your dealer, or you can order them from
the manufacturer.
CLEANING AND REPLACEMENT OF THE MOTOR FILTER
1. Disconnect the exible hose and open the appliance cover.
2. Pull the dust collection bag out of its holder so that you can access the motor lter
more easily.
3. Remove the motor lter (Fig. 4). You can clean the lter by tapping it. If the lter is
heavily soiled, you may wash it in lukewarm water and let it dry properly.
4. Insert the cleaned or new motor lter into the appliance and close the cover.
(Fig.3)
(Fig.4)
28 VP8110, VP8111, VP8112
EN
(Fig. 3)
(Fig. 4)
37
EN
VP 8336
29VP9181
EN
CLEANING AND REPLACING THE AIR OUTLET FILTER
1. Open the air outlet grid in the appliance‘s rear section (Fig. 5).
2. Remove the air outlet lter. This type of vacuum cleaner is equipped with a
H.E.P.A. lter in the outlet, which is capable of catching even very ne dust
particles. You can clean this lter by tapping it, then brushing it with asoft
brush. After this operation is complete, you may clean avery dirty lter by
washing and brushing witha soft brush in lukewarm water with no cleaning
agents added. It is important to let the wet parts dry thoroughly. Awet lter
will be damaged by vacuuming! Do not use ahair dryer to dry it!
Note: Wet cleaning may cause more wear and tear of the lter and,
consequently, may shorten its service life.
3. Insert the cleaned or new air outlet lter into the appliance and close the air
outlet grid.
TROUBLESHOOTING
Problem Cause Solution
Motordoesnotrun.
Pluginsertedintothemainsoutlet
incorrectlyorinsuciently. Checktheplugconnection.
Themainsoutletisnotlive. Checkforvoltage,e.g. byconnecting
anotherappliance.
Motorhasstopped
operating.
Improperorinsucientairow.Motor
overheatingfuseactivated.
Disconnect the cable from the socket.
Checkandreleasetheairsuction
anddischargeholes;checkthelter’s
cleanlinessand/orreplacethedustbag.
Letthevacuumcleanercooldown.
Front covercannotbe
closed Dustbaginsertedincorrectly. Checkthedustlterinstallation.
Reducedsuctionpower
Dustbagfullorclogged. Replacethedustbag.
Obstructedlter. Cleanorreplacethelter.
Cloggednozzle,tube,orhose. Checkandcleartheairpassageonthe
suctionanddischargesides.
Vacuumcleanerheats
up Slightheatingofthevacuumcleanerisnormalandcannotbeconsideredafailure.
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
SMS dust bags (5 units +2units of motor lters) Order code sms9000 Priced according to the valid price list
Fabric dust bag, 1Ord. No. ts9180 Price according to the applicable price list
Motor lter Order code44290910 Price according to the valid price list
H.E.P.A. air outlet lter Order code 44290911 Priced according to the valid price list
(Fig.5)
29
VP8110, VP8111, VP8112
EN
(Fig. 5)
CLEANING AND REPLACING THE AIR OUTLET FILTER
1. Open the air outlet grid in the appliance‘s rear section (Fig. 5).
2. Remove the air outlet lter. You can clean this lter by tapping it, then brushing it
with a soft brush. After this operation is complete, you may clean a very dirty lter by
washing and brushing with a soft brush in lukewarm water with no cleaning agents
added. It is important to let the wet parts dry thoroughly. A wet lter will be dam-
aged by vacuuming! Do not use a hair dryer to dry it!
Note: Wet cleaning may cause more wear and tear of the lter and, consequently,
may shorten its service life.
3. Insert the cleaned or new air outlet lter into the appliance and close the air outlet
grid.
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
SMS dust bags (5 units + 2 units of motor lters) Order code sms9000 Priced according to the valid price list
Fabric dust bag, 1 Order code 44291711 Price according to the applicable price list
Motor ler Order code 44291704 Price according to the valid price list
28 VP9181
EN
CHECKING THE DUST COLLECTION BAG FILL
Whenthedustcollectionbagllindicatorturnsredduringoperation,replacethefulldustcollectionbagimmediately.
Ifthedustcollectionbagllindicatorisstillredafterthebaghasbeenreplaced,thismaybeduetoseveralcauses:
-someoftheairpassages(hoses,telescopictube,suctioninlet,brushadapter,orotheradapters)areobstructed;
-themotorlterisdirty;
-theairoutletlterisdirty.
Checkforeachofthepossiblecausesaboveandeliminatetheproblembeforeyoustartvacuuming.Ifthecauseofthe
problemcannotbeidentied,handovertheproducttothenearestservicecentre.Neverusethevacuumcleanerifthe
baglevelindicatoriscompletelyredduringoperation.Themotorcouldbedamagedirreparably
CLEANING AND MAINTENANCE
Youmaycleantheaccessoriesandtheappliancewithawetcloth.Neverimmerse
theapplianceinwater!Donotuseanyaggressivesubstancesforcleaning,suchas
solventsorabrasives!
REPLACING THE DUST COLLECTION BAG
1. Unplugtheproductfromthemains.Disconnectthehosefromthesuctioninlet
andopentheappliancecover.
2. Pushtheaponthedustretentionbagholder;removetheuseddustretention
bag(Fig.3).DisposeofapaperorSMSdustcollectionbag.Becarefulnottotear
the bag when handling. If the bag is made of fabric, empty it and close it
carefully - it can be used repeatedly.
3. Insertaneworemptydustretentionbagbyttingtheplateinthebagholder.The
bagopeningmustbealignedwiththehoseholeintheappliancecover.
4. Never use the vacuum cleaner without the dust bag installed! If you forget to
insert thedust retentionbagor youinsertit incorrectly,theappliance‘smotor
maybecomedamaged.
5. Closethecover.Pressuntilyouhearaclick.
REPLACING FILTERS
•The lters should be cleaned or replaced when they are visibly dirty, or if the
appliance‘s suction power is reduced. Always check the lters after using the
appliance.
•Inordertoavoiddamagetotheappliance,donotuseitwithincorrectlyinstalled
lters.
•Beforereplacingthelters,disconnecttheappliancefromtheelectricalsocket.
•Youcanbuysuitabletypesofltersfromyourdealer,oryoucanorderthemfrom
themanufacturer.
CLEANING AND REPLACEMENT OF THE MOTOR FILTER
1. Disconnecttheexiblehoseandopentheappliancecover.
2.Pullthedustcollectionbagoutofitsholdersothatyoucanaccessthemotorlter
moreeasily.
3. Removethemotorlter(Fig.4).Youcancleanthelterbytappingit.Ifthelteris
heavilysoiled,youmaywashitinlukewarmwaterandletitdryproperly.
4. Insertthecleanedornewmotorlterintotheapplianceandclosethecover.
(Fig.3)
(Fig.4)
28 VP8110, VP8111, VP8112
EN
(Fig. 3)
(Fig. 4)
36
EN
VP 8336
… 19 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Concept VP8370 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info