Bedienungsanleitung Constructa CD646850 (Seite 23 von 56) (Deutsch, Englisch, Holländisch, Französisch)

715177

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Trouble shooting

Tr oubl e shoot i ng

Malfunctions often have simple explanations. Please read the

following notes before calling the after-sales service.

: Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried

out and damaged power cables replaced by one of our trained

after-sales technicians. If the appliance is defective, unplug the

appliance from the mains or switch off the circuit breaker in the

fuse box. Contact the after-sales service.

Malfunction table

LED lights

Defective LED lights may be replaced by the manufacturer, their

customer service or a qualified technician (electrician) only.

: Risk of injury!

The light emitted by LED lights is very dazzling, and can

damage the eyes (risk group 1). Do not look directly into the

switched on LED lights for longer than 100 seconds.

Customer service

Cust omer ser vi ce

When calling us, please give the product number (E no.) and

the production number (FD no.) so that we can provide you with

the correct advice. The rating plate with these numbers can be

found inside the appliance (remove the metal mesh grease

filter to gain access).

You can make a note of the numbers of your appliance and the

telephone number of the after-sales service in the space below

to save time should it be required.

Please be aware that a visit by an after-sales engineer will be

charged if a problem turns out to be the result of operator error,

even during the warranty period.

Please find the contact data of all countries in the enclosed

customer service list.

Rely on the professionalism of the manufacturer. You can

therefore be sure that the repair is carried out by trained service

technicians who carry original spare parts for your appliances.

Accessories

(not included in the scope of delivery)

Note: These instructions apply to several appliance models. It

may be the case that an optional accessory that is listed does

not apply for your appliance.

Note: Observe the installation instructions in the accessory.

--------

Problem Possible cause Solution

The appliance

does not work

The plug is not

plugged in.

Connect the appliance to

the electricity supply

Power cut Check whether other

kitchen appliances are

working

Faulty fuse Check in the fuse box to

make sure that the fuse

for the appliance is OK

The lighting

does not work.

The LED lights

are defective.

Call the after-sales ser-

vice.

The button illu-

mination does

not work.

The control unit

is faulty.

Call the aftersales ser-

vice.

E no. FD no.

After-sales serviceO

Accessory - narrow 260 mm Order number

Starter set for air recirculation mode CZ5101X5

CleanAir recirculation module

Easy-change filter for CleanAir recirculation

module (cannot be regenerated)

CZ5270X0

CZ5170X1

Accessory - wide 345 mm Order number

Starter set for air recirculation mode CZ5102X5

CleanAir recirculation module

Easy-change filter for CleanAir recirculation

module (cannot be regenerated)

CZ5276X0

CZ5170X1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Constructa CD646850 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info