Bedienungsanleitung Cupra Formentor 2024 (Seite 360 von 404) (Englisch)

817300

360

Zoom out

Zoom in

Vorherige Seite

1/404

Nächste Seite

358

Wheels and tyres

●Driving on unpaved roads for a long pe-

riod of time, or sporty driving, may tempora-

rily deactivate the system. The warning lamp

shows a fault, but disappears when road con-

ditions or driving behaviour change.

●Do not only rely on the tyre pressure mon-

itoring system. Check the tyres regularly to

ensure that the tyre pressures are correct

and that the tyres are free of damage such as

punctures, cuts, gouges and dents. Remove

any non-puncturing objects from the tyres.

●The tyre pressure monitoring indicator

does not function when there is a fault in the

ESC or ABS ›››page174.

Troubleshooting

Low tyre pressure

The control lamp switches on yellow.

The ination pressure of one or more wheels

is much lower than the value set by the driver,

or the tyre has structural damage. In addition,

a audible warning sounds and a text message is

displayed on the instrument panel screen.

● Stop the vehicle! Stop the vehicle safely

as soon as possible.

●Check all tyres and pressures.

●Replace any damaged tyres.

Fault in the tyre pressure loss indicator

The control lamp ashes for approximately 1

minute and then lights up permanently in yel-

low.

●If the tyre is inated correctly, switch the ig-

nition o and on again.

●Re-calibrate the tyre pressure monitoring

system ›››page356

●If the fault continues, go to a specialised

workshop.

Tyre repair

TMS (Tyre Mobility System) punc-

ture repair kit

The puncture repair kit (Tyre Mobility System)

will reliably seal punctures caused by the pene-

tration of a foreign body of up to about 4mm

in diameter. Do not remove foreign objects,

e.g. screws or nails, from the tyre.

After inserting the sealant residue in the tyre,

you must again check the tyre pressure about

10minutes after starting the engine.

You should only use the tyre mobility set if the

vehicle is parked in a safe place, you are famil-

iar with the procedure and you have the nec-

essary tyre mobility set. Otherwise, you should

seek professional assistance.

Tyre sealant must not be used in the follow-

ing cases:

●If the wheel rim has been damaged.

●In outside temperatures below -20°C (-4°F).

●If the cut or punctures in the tyres are larger

than 4 mm.

●If the tyre has been driven on with very low

ination pressure or no tyre pressure.

●If the expiry date of the sealant bottle has

passed.

WARNING

Using the puncture repair kit can be danger-

ous, particularly when lling the tyre on the

roadside. To reduce the risk of serious injury,

consider the following:

●Stop the vehicle as soon as possible in a

safe place. Park it at a safe distance from

road traic to ll the tyres.

●Make sure the ground is at and rm.

●All occupants, especially children, should

stay a safe distance away from the work area.

●Turn on the hazard lights to warn other

road users.

●Always stop the engine, apply the elec-

tronic parking brake and put it in gear if tted

with a manual gearbox, or press the parking

lock button P if tted with an automatic gear

box, to reduce the risk of involuntary move-

ment of the vehicle .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Formentor 2024 Seite 360

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Formentor 2024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info