Bedienungsanleitung DeLonghi ECAM45.760 Eletta Cappuccino (Seite 5 von 20) (Englisch)

800465

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

118

If the power socket does not match the plug on the appliance,

have the socket replaced with a suitable type by a qualied

electrician.

5.4 Setting up the appliance

Please note!

• Coee has been used to factory test the appliance and it is

therefore completely normal for there to be traces of cof-

fee in the mill. The machine is, however, guaranteed to be

new.

• You should customise water hardness as soon as possible

following the instructions in section “14. Setting water

hardness”.

1. Insert the power cord (C8) connector into the socket at the

back of the appliance (A19) and connect the appliance to

the mains electricity supply (g. 1). Make sure the main

switch (A20) at the back of the appliance is pressed (g. 2).

2. Remove the water tank (A16- g. 3), open the lid (A18- g.

4), ll to the MAX line with fresh water (g. 5), replace the

lid and put the tank back in the appliance.

You must rst choose the language by moving backwards and

forwards with the < (B4) or > (B8) (g. 9) button, or waiting

until the languages scroll through on the display (B13) at inter-

vals of about 3 seconds:

3. When “English” appears, press and hold the OK button

(B12-g. 10) for a few seconds until “English set” appears

on the display.

Follow the instructions indicated on the appliance display:

4. “INSERT WATER SPOUT”: Check that the hot water spout

(C6) is inserted on the connection nozzle (A8) and place a

container holding a minimum of 100 ml underneath (g.

7).

5. “HOT WATER Press OK” is displayed;

6. Press the OK button to conrm (g. 10). The appliance de-

livers water from the spout then goes o automatically.

The coee machine is now ready for normal use.

Please note!

• When setting up the appliance, you need to make 4-5 cups

of coee or 4-5 cappuccinos before the appliance starts to

give satisfactory results.

• When making the rst 5-6 cappuccinos, it is normal to hear

the noise of boiling water. After this, the noise becomes

less.

• To enjoy your coee even more and improve the perfor-

mance of your appliance, we recommend installing a

water softener lter (C4) as described in section “15. Water

softener lter”. If your model is not provided with a lter,

you can request one from De’Longhi Customer Services.

6. TURNING THE APPLIANCE ON

Please note!

Before turning the appliance on, make sure the main switch

(A20) is pressed (g. 2).

Each time the appliance is turned on, it performs an automatic

preheat and rinse cycle which cannot be interrupted. The appli-

ance is ready for use only after completion of this cycle.

Danger of burns!

During rinsing, a little hot water comes out of the coee spouts

(A7) and is collected in the drip tray (A12) underneath. Avoid

contact with splashes of water.

• To turn the appliance on, press the button (B1-g.

8). The message “Heating up, Please wait” appears on the

display (B13).

When heating is complete, the message changes to “RINSING”.

As well as heating the boiler, this also heats the internal circuits

by circulating hot water.

The appliance is at temperature when the message indicating

the taste and quantity of coee appears.

7. TURNING THE APPLIANCE OFF

Whenever the coee machine is turned o after being used to

make coee, it performs an automatic rinse cycle.

Danger of burns!

During rinsing, a little hot water ows from the coee spouts

(A7). Avoid contact with splashes of water.

• To turn the appliance o, press the button (B1- g.

8).

• The message “Turning o Please wait” appears on the

display (B13), then, if necessary, the appliance performs a

rinse cycle and goes o (standby).

Please note!

If you will not be using the appliance for some time, unplug

from the mains socket:

• rst turn the appliance o by pressing the button;

• release the main switch (A20) at the back of the appliance

(g. 2).

Important!

Never press the main switch while the appliance is on.

8. MENU SETTINGS

8.1 Rinsing

Use this function to deliver hot water from the coee spout (A7)

and from the hot water/steam spout (C6), if inserted, to clean

and heat the appliance’s internal circuit.

Place a container with a minimum capacity of 100 ml under the

hot water/steam spout (g. 7).

To enable the function, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Rinsing” appears on

the display (B13);

3. Press the OK button (B12-g. 10): the message “Conrm?”

is displayed;

Danger of burns!

Do not leave the appliance unattended while hot water is being

delivered.

4. Press the OK button. “RINSING Please wait” is displayed;

5. After a few seconds, hot water is delivered rst from the

coee spouts, then from the hot water/steam spout (if in-

serted) to heat the appliance’s internal circuit. “RINSING” is

displayed, together with a progress bar which lls gradual-

ly as preparation proceeds;

6. To stop the process press any button or wait for delivery of

water to stop automatically.

Please note!

• If the appliance is not used for more than 3-4 days, when

switched on again, we strongly recommend performing

2/3 rinses before use;

• After cleaning, it is normal for the grounds container (A10)

to contain water.

8.2 Descaling

For instructions on descaling, see section “13. Descaling”.

8.3 Install lter

For instructions on how to install the lter, see section “15.

Water softener lter”.

8.4 Replacing the water softener lter (if

installed)

For instructions on how to replace the lter, see section “15.2

Replacing the lter”.

8.5 Adjust time

To adjust the time on the display (B13), proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Adjust time” is

displayed;

3. Press the OK button (B12-g. 10): the hours ash on the

display;

4. Press < or > to change the hour;

5. Press the OK button to conrm. The minutes ash;

6. Press < or > to change the minutes;

7. Press the OK button to conrm.

The time is set. Press the MENU/ESC button to exit the menu.

DeLonghi ECAM45.760 Eletta Cappuccino Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM45.760 Eletta Cappuccino

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info