Bedienungsanleitung DeLonghi ECAM45.760 Eletta Cappuccino (Seite 7 von 20) (Englisch)

800465

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

120

17.1 Illuminazione tazza

Con questa funzione si attivano o disattivano le luci di illuminazione tazza: la

macchina è preimpostata con l’illuminazione attivata.

Le luci si accendono ad ogni erogazione di caè, bevande al latte e ad ogni

risciacquo.

Per disattivare o riattivare questa funzione, procedere come segue:

1. Premere il tasto MENU/ESC per entrare nel menù;

2. Premere < o > (g. 9) nché appare sul display la scritta “Illuminazione

tazza”;

3. Premere il tasto OK: il display visualizza “Disattiva?” (o “Attiva?”, se

disattivato);

4. Premere il tasto OK per attivare o disattivare l’illuminazione tazza;

5. Premere quindi il tasto MENU/ESC per uscire dal menù.

4. Press the OK button to enable or disable the cup warmer

(the message “Cup warmer Enabled” indicates that it is

active);

5. Press the MENU/ESC button to exit the menu.

Warming the cups keeps the coee hot.

8.9 Energy saving

Use this function to enable or disable energy saving. When en-

abled, the function reduces energy consumption in compliance

with European regulations.

To disable (or enable) energy saving, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Energy Saving” appears

on the display (B13);

3. Press the OK button (B12- g. 10). “Disable?” is displayed

(or “Enable?” if the function has been disabled);

4. Press the OK button to disable (or enable) energy saving

mode;

5. Press the MENU/ESC button to exit the menu.

When the function is active, if the machine is not used for some

time, “Energy saving” is displayed.

Please note!

• When in energy saving mode, a few seconds elapse before

the rst coee, cappuccino or milk based coee is delivered

as the appliance must heat up again.

• To prepare any drink, press any button to exit energy sav-

ing, then press the button corresponding to the drink you

want to make.

• If the milk container is inserted, “Energy saving” is not

activated.

8.10 Setting the temperature

To modify the temperature of the water used to make the coee,

proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Set temperature” ap-

pears on the display (B13);

3. Press the OK button (B12- g. 10);

4. Press < or > until the required temperature is displayed

(●=low; ●●●●=maximum);

5. Press the OK button to conrm;

6. Press the MENU/ESC button to exit the menu.

8.11 Setting water hardness

For instructions on setting water hardness, see section “14. Set-

ting water hardness”.

8.12 Setting the language

To modify the language of the display (B13), proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Set language” is

displayed;

3. Press the OK button (B12- g. 10);

4. Press < or > until the required language is displayed;

5. Press the OK button to conrm;

6. A message conrming the language installed is displayed;

7. Press the MENU/ESC button to exit the menu.

8.13 Beep

This enables or disables the beep emitted by the machine each

time a button is pressed or an accessory is inserted/removed. To

disable or re-enable the beep, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Beep” appears on the

display;

3. Press the OK button (B12- g. 10): the message “Disa-

ble?” is displayed (or “Enable?” if the function has been

disabled);

4. Press the OK button to enable or disable the beep;

5. Press the MENU/ESC button to exit the menu.

8.14 Default values (reset)

This resets all menu settings and programmed quantities back

to the default values (with the exception of the language which

remains as set).

To reset the default values, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Default values” ap-

pears on the display (B13);

3. Press the OK button (B12- g. 10);

4. The message “Conrm?” is now displayed

5. Press the OK button to conrm and exit.

8.15 Statistics function

This displays statistics relating to the machine. To display, pro-

ceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Statistics” appears on

the display (B13);

3. Press the OK button (B12- g. 10);

4. By pressing < or > you can check:

- how many coees have been made;

- the total number of cappuccinos and milk based coees;

- the total number of litres of water delivered;

- how many times the machine has been descaled;

- how many times the water softener lter has been

replaced.

5. Press the MENU/ESC button twice to exit the menu.

9. MAKING COFFEE

9.1 Selecting the coee taste

The appliance is set by default to make coee with a standard

taste.

You can also choose one of these tastes:

Extra mild taste

Mild taste

Standard taste

Strong taste

Extra-strong taste

To change the taste, press the button (B2- g. 11)

repeatedly until the required taste is displayed.

9.2 Selecting the quantity of coee in the cup

The appliance is set by default to make a standard quantity of

coee. To select the quantity of coee, press the

button (B15- g. 12) until the message corresponding to the

required quantity of coee is displayed:

Coee selected Quantity in cup (ml)

MY COFFEE Programmable:

from ≃20 to ≃180

SHORT ≃40

STANDARD ≃60

LONG ≃90

EXTRA LONG ≃120

9.3 Customising the “my coee” quantity

The appliance is set by default to automatically deliver 30 ml of

“MY COFFEE”. To modify this quantity, proceed as follows:

1. Place a cup under the coee spouts (A7-g. 13).

2. Press the button (B5- g.12) until “MY COFFEE”

is displayed.

3. Press and hold the button (B11-g. 17) until the

message “1 MY COFFEE Program quantity” is displayed and

coee delivery begins. Then release the button;

4. As soon as the coee in the cup reaches the required level,

press the button again.

The quantity of coee in the cup has now been programmed.

9.4 Adjusting the coee mill

The coee mill is set by default to prepare coee correctly and

should not require regulating initially.

DeLonghi ECAM45.760 Eletta Cappuccino Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM45.760 Eletta Cappuccino

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info