Bedienungsanleitung Denon AVR-4308A (Seite 36 von 119) (Englisch)

522887

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite



Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting

ENGLISH

Speciﬁcations

EXT. IN Setup

Make speaker settings for EXT. IN mode playback.

Audio Setup

Make settings for audio playback.

F Menu tree F

Manual Setup

Audio Setup

a EXT.IN Setup

s 2ch Direct/Stereo

d Downmix Option

f Auto Surround Mode

g Manual EQ

Surround Speaker

Select the surround speakers to use.

[Selectable items] A

A+B

Subwoofer Level

Set the subwoofer level for playback.

Select according to the player in use.

[Selectable items] 0dB

+5dB

+10dB

+15dB

We recommend setting to “+15 dB”.

2ch Direct/Stereo

Make speaker settings for 2-channel mode playback.

Setting

To change the settings, select “Custom”.

[Selectable items]

Use the same settings as in “Speaker Setup”.

Basic

Custom

Front

Select front speaker size.

[Selectable items] Large

Small

Subwoofer

Select subwoofer use.

[Selectable items] Yes

Subwoofer Mode

Select low range signal to be reproduced by subwoofer.

[Selectable items] LFE

LFE+Main

Crossover

Select crossover frequency from which subwoofer handles low range

signal.

[Selectable items]

40Hz

60Hz

80Hz

90Hz

100Hz

110Hz

120Hz

150Hz

200Hz

250Hz

Distance FL

Set distance from listening position to front left speaker.

[Variable range] 0.00m ~ 18.00m

Distance FR

Set distance from listening position to front right speaker.

[Variable range] 0.00m ~ 18.00m

Downmix Option

Set dynamic range for downmix playback of Dolby Digital

sources.

[Selectable items]

OFF

• Set this to “ON” if the sound from the front speakers seems

distorted.

• When not using the center speaker or surround speakers, the

playback sound is down-mixed and output from the front speakers.

Auto Surround Mode

Make setting for memorizing surround mode setting for

each input signal type.

[Selectable items] ON

OFF

• The auto surround mode function lets you store in the memory the

surround mode last used for playing the four types of input signals

listed below.

q Analog and PCM 2-channel signals

w Dolby Digital and DTS 2-channel signals

e Dolby Digital and DTS multi-channel signals

r Multi-channel signals other than Dolby Digital and DTS (PCM,

DSD, etc.)

• When playing in the PURE DIRECT mode, the surround mode does

not change even if the input signal is changed.

Manual EQ

Adjust tonal quality for each speaker using graphic

equalizer.

Adjust CH

Select speaker adjustment method.

[Selectable items] Each

L/R

All

Manual EQ

Select the speaker and frequency band and adjust the level.

[Selectable items] 63

125

250

500

16k

Curve Copy

Copy the Room EQ’s “Audyssey Flat” correction curve.

[Selectable items] Yes

“Curve Copy” is displayed after the auto setup procedure has been

performed.

Default

Resets the settings to the default values.

[Variable range] –20dB

0dB

+6dB

Setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-4308A Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info