522887
35
Zoom out
Zoom in
Vorherige Seite
1/119
Nächste Seite

Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Specifications
a
i/p Scaler
Make settings for i/p scaler function.
[Selectable items] A to H
A to H & H to H
OFF
s
Resolution
Make settings for resolution of HDMI video output signal.
[Selectable items] Auto
480p/576p
1080i
720p
1080p
NOTE
It is not possible to convert “1080i” signals into “720p” format.
It is not possible to convert “720p” signals into “1080i” format.
This can be set when “i/p Scaler” is set to anything other than OFF”.
d
Progressive Mode
Select optimum progressive mode for video material.
[Selectable items] Auto
Video1
Video2
This can be set when “i/p Scaler” is set to anything other than OFF”.
f
Aspect
This sets the aspect ratio when outputting 480i/576i or
480p/576p input signals from the HDMI output connector.
[Selectable items] Full
Normal
This can be set when “i/p Scaler” is set to anything other than OFF”.
g
Color Space
Make settings for output color space.
[Selectable items] YCbCr
RGB
When connected to a monitor with a DVI-D connector (HDCP
compatible) using an HDMI/DVI converter cable, the signals are output
in RGB format, regardless of this setting.
h
RGB Range
Make settings for RGB output range.
[Selectable items]
Normal
Enhanced
A to H & H to H setting
Deep color (10 bit/12 bit) signals are converted into 8-bit signals.
The i/p scaler function does not work if xvYCC or computer’s
resolution signals are input.
j
Auto Lip Sync
Automatic compensation for timing shift in audio and video
output.
[Selectable items] ON
OFF
k
Audio
Select HDMI audio output device.
[Selectable items] Amp
TV
l
Monitor Out
Make settings for HDMI monitor output.
[Selectable items] Auto (Dual)
Monitor 1
Monitor 2
Operating from the main remote control unit
Press the M. SEL button.
When “Monitor Out” is set to “Auto (Dual)”, connections with
the MONITOR 1 or MONITOR 2 connectors are recognized
automatically.
If both the MONITOR 1 and 2 connectors are connected and
“Resolutionis set to Auto, the signals are output with a resolution
compatible with both monitors.
If “Resolution is set to something other than Auto, check the
resolutions with which your monitor is compatible at GUI menu
“Information“HDMI Information“Monitor 1” and “Monitor 2”
and set accordingly (vpage 50).
Auto (Dual) Monitor 1
Monitor 2
When “YCbCr” is selected under “Color Space, “RGB Range will
have no effect.
HDMI Setup
Make settings for HDMI video/audio output.
F Menu tree F
Manual Setup
HDMI Setup
a i/p Scaler
s Resolution
d Progressive Mode
f Aspect
g Color Space
h RGB Range
j Auto Lip Sync
k Audio
l Monitor Out
NOTE
Depending on the monitor you have connected, the display may not
be correct when you set to Auto (Dual)”. In such a case, set to either
“Monitor 1” or “Monitor 2”.
Setup
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon AVR-4308A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info