Bedienungsanleitung Denon AVR-4308A (Seite 34 von 119) (Englisch)

522887

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

0

Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting

ENGLISH

Speciﬁcations

Mode

Select test tone playback method.

Channel Level

Adjust channel levels to obtain equal volume from all

speakers.

[Selectable items] Auto

Manual

Surround

Select surround speaker from which test tone is output.

[Selectable items] A

A+B

Start

Output test tone.

[Variable range]

• When the GUI menu “Speaker Conﬁguration” – “Surround Back”

setting (vpage 29) is set to “1spkr”, the surround back speaker

display is set to “Surround Back”.

• Speakers set to “None” in the “Speaker Conﬁguration” settings are

not displayed.

• “Surround” can be set when GUI menu “Speaker Conﬁguration” –

“Surround B” is set to “Large” or “Small” (vpage 29).

• When using surround speakers, be sure to adjust the volume of the

different speakers.

• When “Channel Level” is adjusted, the adjusted values are set for

all the surround modes. To adjust the channel level separately for the

different surround modes, use the operation see page 66.

Operating from the main remote control unit

Adjusting with the main remote control unit using the test tones is

only possible in the “Auto” mode and only effective in the STANDARD

mode. The adjusted levels for the different modes are automatically

stored in the memory.

GAdjusting using test tonesH

q Press the TEST button.

Test tones are output from the various speakers.

w Use the o p button to adjust so that the volume is equal for all

speakers.

e When the adjustments are completed, press the TEST button

again.

Default

Resets the settings to the default values.

Crossover Frequency

Select crossover frequency from which subwoofer handles

low range signal.

[Selectable items]

40Hz

60Hz

80Hz

90Hz

100Hz

110Hz

120Hz

150Hz

200Hz

250Hz

Only the portion of the bass sound of the various speakers output

from the subwoofer that has a frequency below the frequency set

here is output.

Set this according to the low frequency reproduction capabilities of the

speakers you are using.

Advanced

Set the crossover frequency separately for the different speakers.

• The “Crossover Frequency” can be set when there are speakers that

have been set to “Small” at GUI menu “Speaker Conﬁguration” or

when “Subwoofer” is set to “Yes” (vpage 29).

• If in the “Advanced” settings, “Subwoofer Mode” (vpage 29)

in the GUI menu is set to “LFE”, it is possible to make this setting

for speakers set to “Small” at “Speaker Conﬁguration”. If set to

“LFE+Main”, this setting can be made regardless of the speaker

size.

• For speakers set to “Small”, sound below the crossover frequency

is cut from the sound output. The cut bass sound is output from the

subwoofer or front speakers.

• Always set the crossover frequency to “80Hz”. When using small

speakers, however, we recommend setting the crossover frequency

to a higher frequency.

Surround Speaker

Select surround speakers to use for each surround mode.

[Selectable items]

A+B

Operating from the main remote control unit

Press the SPKR button.

Surround A Surround B

Surround A+B

• This can be set when GUI menu “Speaker Conﬁguration” – “Surround

A” and “Surround B” are used (vpage 29).

• When using the pre-out connectors, select and use either “Surround

A” or “Surround B”.

• Make the surround speaker settings when the input mode is set to

“EXT. IN” at GUI menu “Manual Setup” – “Audio Setup” – “EXT. IN

Setup” (vpage 32).

–12dB

0dB

+12dB

About Speaker Type Setting when Using Both

Surround speakers A and B

If “Small” is set for either surround speakers A or B, the output is the

same as when “Small” is set for both A and B.

Setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-4308A Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info