Bedienungsanleitung Denon AVR-4308A (Seite 33 von 119) (Englisch)

522887

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite



Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting

ENGLISH

Speciﬁcations

Make detail settings for various parameters.

Speaker Setup

Use this procedure to set the speakers

manually or if you wish to change the

settings made with the auto setup

procedure.

F Menu tree F

Manual Setup

Speaker Setup

a Speaker Conﬁguration

s Subwoofer Mode

d Distance

f Channel Level

g Crossover Frequency

h Surround Speaker

Manual Setup

Front

Select front speaker size.

Speaker Conﬁguration

Select speaker conﬁguration and size.

(bass reproduction capability)

[Selectable items] Large

Small

Center

Select center speaker use and size.

[Selectable items] Large

Small

None

Subwoofer

Select subwoofer use.

[Selectable items] Yes

Surround A

Select surround speakers A use and size.

[Selectable items] Large

Small

None

Surround B

Select surround speakers B use and size.

[Selectable items] Large

Small

None

Surround Back

Select surround back speaker use and size.

[Selectable items] Large

Small

None

2spkrs

1spkr

• Select “Large” or “Small” not according to the physical size of the

speaker but according to the low frequency reproduction capabilities

based on the frequency set at “Crossover Frequency” (vpage

30).

• When “Front” is set to “Small”, “Subwoofer” is automatically set to

“Yes”.

• If “Subwoofer” is set to “No”, “Front” is automatically set to

“Large”.

• If “Surround A” is set to “None”, “Surround B” and “Surround Back”

are automatically set to “None”.

• When using just one surround back speaker, connect it to the left

channel (SBL).

Subwoofer Mode

Select low range signal to be reproduced by subwoofer.

[Selectable items] LFE

LFE+Main

• This can be set when GUI menu “Speaker Conﬁguration” –

“Subwoofer” is set to “Yes”.

• Play music or a movie source and select the mode offering the

strongest bass.

• Select “LFE+Main” if you want the bass signals to always be

produced from the subwoofer.

Distance

Set distance from listening position to speakers.

Before making the settings, measure the distance from

the listening position to the different speakers.

Meters / Feet

Select unit for distance.

Step

Select step. (smallest distance)

[Selectable items]

Default

Resets the settings to the default values.

Distance measurement

Select the speaker you want to set, then set the distance.

Set the value closest to the measured distance.

[Variable range]

NOTE

Set the distance between the listening position and the various

speakers to no more than 6.00 meters (20.0 ft).

Large

: Select this for a large speaker with strong bass

reproduction.

Small

: Select this for a smaller speaker with weaker bass

reproduction.

0.1m

0.01m

: Can be selected when “Meters” is set.

1ft

0.1ft

: Can be selected when “Feet” is set.

0.00m ~ 18.00m

: Display when “Meters” is set.

0.0ft ~ 60.0ft

: Display when “Feet” is set.

Setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-4308A Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info