Getting Started Connections Setup Remote Control Information Troubleshooting
ENGLISH
D.COMP
LFE
D.COMP
LFE
CINEMA
MUSIC
Set the Surround Parameter
Use [SURROUND PARAMETER] to display the various
surround parameters, then select with [o p].
After several seconds, the display returns to normal and the
parameters you have set are entered automatically.
[Selectable items]
D.COMP
(Dynamic range compression):
Optimized setting for late-night listening.
D.COMP only works when playing program sources record in Dolby
Digital or DTS.
LFE
(Low Frequency Effect):
This sets the level of the subwoofer reproducing the low bass sig-
nals.
b Recommended level
When playing Dolby Digital software: 0 dB
When playing DTS movie software: 0 dB
When playing DTS music software: –10 dB
CINEMA
:
When the Dolby Headphone mode is selected, analog, PCM or other
2-channel sources are decoded in the Dolby Pro Logic g Cinema mode
and transformed into multiple channels for playback.
MUSIC
:
When the Dolby Headphone mode is selected, analog, PCM or other
2-channel sources are decoded in the Dolby Pro Logic g Music mode
and transformed into multiple channels for playback.
Playing Dolby Digital/DTS Multi-
Channel Sources (Digital input only)
1
Switch the input source (vpage 20).
(DVD and AUX1 digital input)
2
Use [SURROUND] to select the “DOLBY VS REF” or
“DOLBY VS WIDE”.
The “ ” indicator lights.
3
Play sources with the or mark sources.
The “ ” or “ ” indicator lights, depending on the playback
source's signal format.
4
Use [SURROUND PARAMETER] to display the various
surround parameters, then select with [o p].
[Selectable items]
Playing Dolby Digital/PCM/Analog 2-
Channel Sources
1
Switch the input source (vpage 20).
2
Use [SURROUND] to select the “DOLBY VS REF” or
“DOLBY VS WIDE”.
The “ ” indicator lights.
3
Play sources with the mark.
The “ ” indicator lights, depending on the playback source’s
signal format.
4
Use [SURROUND PARAMETER] to display the various
surround parameters, then select with [o p].
[Selectable items]
D.COMP
LFE
To check the currently playing source and various
settings
Listening in the Dolby Headphone Mode
1
Switch the input source (vpage 20).
Plug the headphones (sold separately) into the
<PHONES> jack.
The sound from the speakers is automatically cut off.
2
Press [SURROUND] to select the “DOLBY H/P”.
The “ ” indicator lights.
3
Play the source.
4
Use [SURROUND PARAMETER] to display the various
surround parameters, then select with [o p].
[Selectable items]
In the stop mode, press [STATUS].
b The playback source and the various surround settings are shown
on the display each time the button is pressed.
NOTE
Be careful not to set the volume too high when using headphones.
Playback
