Bedienungsanleitung DeWalt D27107 T 3 (Seite 43 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546219

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

ENGLISH

- Health hazards caused by breathing dust developed when sawing

wood, especially oak, beech and MDF.

The following factors are of influence to noise production:

- The material to be cut;

- The type of saw blade;

- The feed force.

The following factors increase the risk of breathing problems:

- No dust extractor connected when sawing wood;

- Insufficient dust extraction caused by uncleaned exhaust filters

- Worn saw blade;

- Workpiece not exactly guided.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

Carrying Point

Hands Away

O/I

When using the machine in the mitre saw mode, make

sure to operate the trigger switch in the handle when

switching ON and OFF. Do not operate the switchbox

in this mode. The ON/OFF switch located on the

machine frame is foreseen for table saw mode only.

When using the machine in the mitre saw mode, make

sure the riving knife is secured in its rest position.

Never use as mitre saw when the guard is not in place.

DATE CODE POSITION (FIG. A1)

The Date Code (143), which also includes the year of manufacture, is printed

into the housing.

Example:

2012 XX XX

Year of Manufacture

Package contents

The package contains:

1 Partly assembled machine

1 Box containing:

1 Top guard for bench saw position

1 Under-table guard for mitre saw position

4 Legs

2 Wheels

4 Feet

1 Parallel fence

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories which may have

occurred during transport.

• Take the time to thoroughly read and understand this manual prior to

operation.

Description (ﬁ g. A1 - A11)

1 On/off switch (saw bench mode)

2 Table release lever

3 Rotating table clamp

4 Mitre saw table

5 Rotating table

6 Fence right-hand side

7 Fence left-hand side

8 Moveable lower blade guard

9 Guard release lever

10 Operating handle

142 Circuit breaker reset button

143 Date code

10 Operating handle

11 Trigger switch (mitre saw mode)

12 Fixed upper blade guard

13 Dust extraction adapter

14 Wheel

15 Leg

16 Foot

17 Bevel clamp knob

18 Height adjuster

19 Saw bench table

20 Riving knife

21 Upper blade guard

22 Parallel fence

23 Push stick

Optional accessories

For use in mitre saw mode:

30 Fence insert (DE7120)

31 Adjustable stand 760 mm (max. height) (DE3474)

32 Support guide rails 1,000 mm (DE3494)

33 Support guide rails 500 mm (DE3491)

34 Inclinable support (DE3495)

35 Swivelling stop (DE3462)

36 Length stop for short workpieces (to be used with guide rails [33])

(DE3460)

37 Support with removable stop (DE3495)

38 Support with stop removed (DE3495)

39 Material clamp (D271051)

40 Roller support table (DE3497)

For use in saw bench mode:

41 Mitre fence (D271052)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D27107 T 3 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info