Bedienungsanleitung DeWalt DCE080GS (Seite 26 von 232) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

790944

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

GB Troubleshooting

Laser Troubleshooting

Height of Instrument Alert

The DCE080RS/GS has a built-in alarm feature that alerts the

operator if the unit is disturbed after the unit has self-leveled. The

laser unit will stop rotating, the control panel LED indicator light will

flash, and the beeper will sound.

Reset the laser unit so you can continue to use it:

1. Press the power button for 3 sec.to turn the laser off. The

power LED indicator light will no longer be illuminated.

2. Press the power button to turn the laser back on again.

Detector Troubleshooting

Detector will not Turn on

1. Make sure the Li-Ion battery is charged.

2. If the detector is very cold, allow it to warm up in a heated area.

3. Press the power button (Figure F 1) to turn the detector on.

4. If the detector still does not turn on, take the detector to

a DEWALT service center.

Detector Makes no Sound

1. Make sure the detector is on.

2. Press the volume button (Figure F 4). It will toggle from high,

to low, to mute. Make sure the speaker icon appears with two

half circles (Figure F 10 ).

3. Make sure the rotary laser is spinning and that it is emitting

a laser beam.

4. If the detector is still not making any sound, take it to a DEWALT

service center.

Detector Emits Sound but Does Not Display

1. If the detector is very cold, allow it to warm up in a heated area.

2. If the LCD display window is still not functioning, take the

detector to a DEWALT service center.

Service and Repairs

Laser Service

Note: Disassembling the laser level will void all warranties on the

product.

To assure product SAFETY and RELIABILITY, repairs, maintenance

and adjustment should be performed by authorized service centers.

Service or maintenance performed by unqualied personnel may

result in a risk of injury. To locate your nearest DEWALT service

center, go to www.2helpU.com.

Detector Service

Except for batteries, there are no user serviceable parts in the Digital

Laser Detector. Do not disassemble the unit. Unauth orized tampering

with the laser detector will void all warranties.

Protecting the Environment

Separate collection. Products and batteries marked

with this symbol must not be disposed of with normal

household waste.

Products and batteries contain materials that can be

recovered or recycled reducing the demand for raw materials. Please

recycle electrical products and batteries according to local provisions.

Further information is available at www.2helpU.com.

Batteries

When disposing batteries, think of the protection of the environment.

Check with your local authorities for an environmentally safe way of

battery disposal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCE080GS Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info