Bedienungsanleitung DeWalt DCE080GS (Seite 25 von 232) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

790944

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

The back of the grade rod is designed to measure the height of

ceilings, joists, etc. Fully extend the top section of the grade rod until

the button locks into the previous section. Extend that section either

until it locks into the adjacent section or until the grade rod touches

the ceiling or joist. The height is read where the last extended section

exits the previous lower section (Figure Q).

Target Card

Some laser kits include a Laser Target Card (Figure R) to aid in

locating and marking the laser beam. The target card enhances the

visibility of the laser beam as the beam crosses over the card. The

card is marked with standard and metric scales. The laser beam

passes through the red plastic and reflects off of the reflective tape

on the reverse side. The magnet at the top of the card is designed to

hold the target card to ceiling track or steel studs to determine plumb

and level positions. For best performance when using the Target

Card, the DeWALT logo should be facing you.

Laser Enhancement Glasses

Some laser kits include Laser En hancement Glasses (Figure S).

These glasses improve the visibility of the laser beam under bright

light conditions or over long distances when the laser is used for

interior applications. These glasses are not required to operate the

laser.

CAUTION:

These glasses are not ANSI approved safety glasses and

should not be used while operating other tools. These

glasses do not keep the laser beam from entering your

eyes.

CAUTION:

To reduce the risk of serious injury, never stare directly into

the laser beam with or without these glasses.

Maintenance

Laser Cleaning and Storage

• Under some conditions, the glass lens may collect some dirt or

debris. This will affect beam quality and operating range. The lens

should be cleaned with a cotton swab moistened with water.

• The flexible rubber shield can be cleaned with a wet lint-free

cloth such as a cotton cloth. USE WATER ONLY — DO NOT use

cleansers or solvents. Allow the unit to air dry before storing.

• To maintain the accuracy of your work, check the calibration of the

laser often. Refer to Checking the Calibration.

• Calibration checks and other maintenance repairs can be

performed by DEWALT service centers. Two free calibration checks

are included under the DEWALT One Year Free Service Con tract.

• When the laser is not in use, store it in the kit box provided.

• Do not store your laser in the kit box if the laser is wet. Dry exterior

parts with a soft, dry cloth and allow the laser to air dry.

• Do not store your laser at temperatures below 0˚F (-18˚C) or above

105˚F (41˚C).

WARNING:

Never use solvents or other harsh chemicals for cleaning

the non-metallic parts of the tool. These chemicals may

weaken the materials used in these parts. Use a cloth

dampened only with water and mild soap. Never let any

liquid get inside the unit; never immerse any part of the unit

into a liquid. Never use compressed air to clean the laser.

Detector Cleaning and Storage

• Dirt and grease may be removed from the exterior of the detector

using a cloth or a soft, non-metallic brush.

• The DEWALT Digital Laser Detector is waterproof. If you should

drop the detector in mud, wet concrete, or a similar substance,

simply hose the detector off. Do not use high pressure water (e.g.,

from a pressure washer).

• The best storage place is one that is cool and dry, and away from

direct sunlight and excess heat or cold.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCE080GS Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info