Bedienungsanleitung DeWalt DCE080GS (Seite 23 von 232) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

790944

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

First Time Pairing Paired Before

1. On the DEWALT® Tool

Connect™ application, click .

2. In the list of DEWALT product

types, select Rotary Laser.

3. Enter a Name for the rotary

laser (e.g., DW080LRS/LGS).

4. On the laser keypad, press

and hold for 3-5 sec until the

Bluetooth® connection turns on

(blue LED starts blinking).

5. When the application lists

the laser’s model number as IN

RANGE, select it.

On the laser keypad,

press to turn on the

Bluetooth® connection. The

blue LED will illuminate.

NOTE:

If the Bluetooth® connection does not turn on, replace the DEWALT

18V battery.

5. On the laser keypad, press (Figure A 6) to turn on the

connection to the detector.

6. On the DEWALT® Tool Connect™ application, press Add a detector.

7. Enter a Name for the detector and press Connect.

8. Turn on the detector and then press to turn on the Bluetooth®

connection.

9. The DEWALT® Tool Connect™ application will display information

about the laser on the Diagnostics screen:

• If the current settings are one of the “favorite settings” you have

saved for the laser, it will display the name of that setting (e.g.,

Main St - Site 1).

• If the laser is dropped, disturbed, etc., it will send messages to

the Tool Connect™ application to inform you.

• If the Tracking feature is on, the application will know where the

laser is and will let you know if the laser has been taken and is

now out-of-range. (The Coin Cell battery enables the Tracking

feature.)

10. Select ACTIONS.

• If you are using more than one rotary laser and need to check

which laser is paired with the application, press the Identify

button at the bottom of the screen. On the paired laser, the

blue LED next to will blink.

• If you need to, you can enable, disable, or unpair the laser.

11. Select Rotary Control to change the setting for the rotary laser.

• When is selected, choose the rotation speed (150, 300,

600, or 1200).

• Select

15˚/45˚/90˚

and choose the rotation angle (0, 15, 45, 90, or

360) and the rotation direction ( or ).

• Select and choose the Slope Setting, Axis Setting (X or Y),

Slope Configuration (% or degree), # degree or %.

12. Use your cell phone to control the laser.

13. When you are ready, turn the laser off from the Diagnostic screen.

Unpairing the Detector from the Application

To unpair the Detector connection to the DEWALT® Tool Connect™

application and return to pairing the application with the laser unit, follow

these steps.

1. On the DEWALT® Tool Connect™ application, unpair the detector

connection on the Diagnostics screen.

2. Turn off the detector.

3. On the laser keypad, press (Figure A 6) to turn off the

connection with the detector. Once the detector is unpaired from the

laser, the laser will automatically switch back to being paired with the

DEWALT® Tool Connect™ application.

4 You can then make sure that the laser unit is paired with the

application. On the ACTIONS screen, select the Identify button at

the bottom of the screen. The blue LED will flash on the paired laser

unit.

5 Then, if you want to unpair the laser unit from the DEWALT® Tool

Connect™ application, you can unpair it from the Actions screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCE080GS Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info