Bedienungsanleitung DeWalt DCE080GS (Seite 22 von 232) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

790944

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

GB 3. Pair the DEWALT® Tool Connect™ application to the laser via a

Bluetooth® connection.

First Time Pairing Paired Before

1. On the DEWALT® Tool

Connect™ application, click .

2. In the list of DEWALT product

types, select Rotary Laser.

3. Enter a Name for the rotary

laser (e.g., DW080LRS/LGS).

4. On the laser keypad, press

and hold for 3-5 sec until the

Bluetooth® connection turns on

(blue LED starts blinking).

5. When the application lists

the laser’s model number as IN

RANGE, select it.

On the laser keypad,

press to turn on the

Bluetooth® connection.

NOTE:

If the Bluetooth® connection does not turn on, replace the 18V

battery.

4. On the DEWALT® Tool Connect™ application, select the

DCE080LRS/LGS rotary laser.

5. The DEWALT® Tool Connect™ application will display information

about the laser on the Diagnostics screen:

• If the current settings are one of the “favorite settings” you have

saved for the laser, it will display the name of that setting (e.g.,

Main St - Site 1).

• If the laser is dropped, disturbed, etc., it will send messages to

the Tool Connect™ application to inform you.

• If the Tracking feature is on, the application will know where the

laser is and will let you know if the laser has been taken and is

now out-of-range. (The Coin Cell battery enables the Tracking

feature.)

6. Select ACTIONS.

• If you are using more than one rotary laser and need to check

which laser is paired with the application, press the Identify

button at the bottom of the screen. On the paired laser, the

blue LED next to will blink.

• If you need to, you can enable, disable, or unpair the laser.

7. Select Rotary Control to change the setting for the rotary laser.

• When is selected, choose the rotation speed (150, 300,

600, or 1200).

• Select

15˚/45˚/90˚

and choose the rotation angle (0, 15, 45, 90, or

360) and the rotation direction ( or ).

• Select and choose the Slope Setting, Axis Setting (X or

Y), Slope Configuration (% or degree), # degree or %.

8. Use your cell phone to control the laser.

9. When you are ready, turn the laser off from the Diagnostic screen.

Controlling the Laser from up to 335m Away

You can use Bluetooth® capability to pair the Detector DW0743DR (Red

laser) or DW0743DG (Green laser) with the DEWALT® Tool Connect™

application on your cell phone, and then use your cell phone to control

the laser (Figure J 3).

1. From either or , download the DEWALT®

Tool Connect™ application to your cell phone.

2. On the laser keypad, press to turn the laser on.

3. On the laser keypad, see if the blue LED next to is lit. If the

blue LED is already lit, the laser is probably already paired with

another smart device. You will need to unpair the laser from

the other device before you can pair it to the DEWALT® Tool

Connect™ application.

4. Pair the DEWALT® Tool Connect™ application to the laser via a

Bluetooth® connection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCE080GS Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info