Bedienungsanleitung DeWalt DCE080GS (Seite 21 von 232) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

790944

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

Pairing the Laser to a Remote

To pair the laser unit to one remote, simultaneously press and hold

15˚/45˚/90˚

on the laser keypad and

15˚/45˚/90˚

on the remote. LEDs on the laser

and the remote will indicate that they are paired (in Private mode).

• The laser unit will beep twice and the locked LED (Figure A

4) on the laser keypad will blink twice and then remain green

to indicate that currently only one remote can control the laser

(Figure L)

• The locked LED on the remote (Figure B 8) will blink twice and

then remain red.

If You Stop Using a Paired Remote

If you stop using a remote that has been paired with a laser unit (remote

is in Private mode), the remote will automatically reset back to Public

mode. You will not be able to use the remote to control the laser unit. The

Lock LED on the laser keypad will remain lit, but you can only use the

laser keypad to control the laser.

If... Result

No buttons are pressed on the

remote keypad right after it is

paired with a laser unit.

Within 1 minute, the remote will

be reset back to Public mode.

Buttons are pressed on the

remote keypad after it is paired

with a laser unit.

After 8 hours, the remote will be

reset back to Public mode.

To change the remote back to Private mode so it can again control the

laser unit, press and hold

15˚/45˚/90˚

on the remote keypad.

If You Turn OFF a Paired Laser Unit

If you use the laser keypad to turn off a laser unit that is paired with a

remote, turning the laser back on will not automatically re-establish the

Private connection with the same remote again.

• The remote that had been paired with the laser unit will remain in

Private mode with the Lock LED still lit, but it will not be able to control

any laser unit.

• The laser unit will default to Public mode and can be controlled by any

remote except the remote that is still in private mode.

To unlock the remote and reset it back to Public mode so it can be used

to control any laser unit again, press and hold the RPM button on the

remote keypad.

Resetting a Remote from Private Mode

When a remote is in Private Mode with a laser unit, you may need to

reset the remote in order to use it with the laser unit again.

Scenario How to Recover

When pressing and holding

15˚/45˚/90˚

on the laser keypad, the

laser entered No Remote

mode.

On the laser keypad, press and hold

the RPM button to return the laser to

Public mode so it can be controlled by

any remote.

The laser unit entered

Private mode while paired

with another remote.

Reset the laser unit back to Public

mode. On the laser keypad, either:

• Press for 3 sec to turn the

power off and then press again

to turn the power back on, OR

• Press and hold the RPM button.

If the Lock LED is lit on

the remote, the remote has

been paired with another

rotary laser.

Press and hold the RPM button on the

remote to reset it to Public mode.

Controlling the Laser from up to 30m Away

You can use Bluetooth® capability to pair the laser with the

DEWALT® Tool Connect™ application on your cell phone, and then

use your cell phone to control the laser (Figure I 2).

1. From either or , download the DEWALT®

Tool Connect™ application to your cell phone and then open the

application.

2. On the laser’s keypad, press to turn the laser on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCE080GS Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info