Bedienungsanleitung DeWalt DCE080GS (Seite 20 von 232) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

790944

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

GB 4. On the top of the display window, view the Accuracy Mode icon

(Figure F 8).

• indicates that the detector will give an “on grade” reading

only when the laser beam is on grade or no more than 1mm

(1/25") above or below it.

• To change the Accuracy Mode to to have the detector

give an “on grade” reading when the laser beam is on grade

or approximately 3mm (1/8") above or below it, press the

Accuracy Mode button (Figure F 3) once. Then (Figure

F 9) appears on the display window.

5. Position the detector so that the detector window (Figure F 14 )

is facing the laser beam produced by the rotary laser (Figure G).

Move the detector up or down within the approximate area of the

beam, until you have centered the detector.

6. Use the marking notches (Figure F 7) to accurately mark the

position of the laser beam.

7. To turn the detector off.

• On the detector, press for 3 seconds.

• If a rotary laser beam does not strike the detector's beam

detection window, or if no detector buttons are pressed, within

30 minutes, the detector will shut itself off.

Controlling the Laser Remotely

You can control the laser unit remotely in either of these 3 ways:

• From up to 15m away, you can use the remote to control the

laser unit (Figure I 1). IR sensors will maintain communication

between the remote and the laser unit.

• From up to 30m away, you can use the DEWALT® Tool Connect™

Application on your Bluetooth® device to connect to the laser unit

(Figure I 2).

• From up to 335m away, you can control the laser unit by using

the DEWALT® Tool Connect™ Application on your Bluetooth®

device to connect to the detector that is connected to the laser unit

(Figure I 3). You must press the Detector button (Figure A

6) on the laser in order to connect the detector to the laser unit.

Controlling the Laser from up to 15m Away

The DCE080RS/GS remote control allows you to operate and set

up the laser from up to 15m away. The LED light on the remote

control (Figure B 1) indicates a signal is being transmitted from the

DCE080RS/GS laser unit.

You can use all the buttons on the remote's keypad to control the

laser unit. To completely power OFF a DCE080RS/GS laser unit

using the Remote keypad, press the X-Y axis button (Figure

B 5) and the Slope Mode button (Figure B 2) simultaneously.

By default, the laser unit is not paired to a remote (the laser unit is

in Public mode). LEDs on the laser unit and the remote will indicate

that they are not paired.

UNLOCKED

in Public Mode

LOCKED

in Private Mode

Description A laser is in Public Mode

if it is not paired with a

remote.

A laser is in Private

Mode if it is paired

with a remote.

A remote is in Public

Mode if it is not paired

with a laser.

A remote is in Private

Mode if it is paired

with a laser.

Control A Public laser can be

controlled by more

than one Public remote

(Figure K 1).

A Private laser can only

be controlled by the

remote to which it is

paired (Figure L).

A Public remote can

control more than one

Public laser (Figure

K 2).

A Private remote can

only control the laser

to which it is paired

(Figure L).

LEDs The unlocked LED

will be lit on the laser

keypad (Figure K 1 and

K 2 ).

The locked LED

on the laser will be lit

(Figure L).

The locked LED on the

remote will NOT be lit

(Figure K 1 and K 2 ).

The locked LED on

the remote WILL be lit

(Figure L).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCE080GS Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info