Bedienungsanleitung DeWalt DCE085R (Seite 11 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

790837

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Turning the Laser Off

Slide the Power/Transport Lock switch to the OFF/Locked

position (Figure A #1a) when the laser is not in use. If the

switch is not placed in the Locked position, all 4 LEDs will

remain lit on the Battery Meter on the keypad ( A #3).

Using the Pivot Bracket

The laser has a magnetic pivot bracket (Figure B #3, Figure

D #1) permanently attached to the unit.

WARNING:

Position the laser and/or wall mount on a stable

surface. Serious personal injury or damage to the

laser may result if the laser falls.

• The bracket has magnets (Figure B #2) which allow the unit

to be mounted to most upright surfaces made of steel or iron.

Common examples of suitable surfaces include steel framing

studs, steel door frames, and structural steel beams.

• The bracket has a keyhole slot (Figure B #1) so it can be

hung from a nail or screw on any kind of surface.

Using the Laser with Accessories

WARNING:

Since accessories other than those offered by

DeWALT have not been tested with this laser, use of

such accessories with this laser could be hazardous.

Only use DeWALT accessories that are recommended for use

with this model. Accessories that may be suitable for one laser

may create a risk of injury when used with another laser.

The bottom of the laser is equipped with 1/4-20 and 5/8-11

female threads (Figure C) to accommodate current or future

DeWALT accessories. Only use DeWALT accessories specied

for use with this laser. Follow the directions included with the

accessory.

Recommended accessories for use with this laser are available

at extra cost from your local dealer or authorized service center.

If you need assistance locating any accessory, please contact

your nearest DeWALT service center or visit our website:

http://www.dewalt.eu.

Using the Laser with the Ceiling Bracket

The laser ceiling bracket (if included) offers more mounting

options for the laser. The ceiling mount has a clamp at one

end which can be xed to a wall angle for acoustic ceiling

installation. At each end of the ceiling mount is a screw hole to

allow it to be hung from a nail or screw on any kind of surface.

Once the ceiling mount is secured, its steel plate provides

a surface to which the magnetic pivot bracket can be attached.

The position of the laser can then be ne-tuned by sliding the

magnetic pivot bracket up or down on the wall mount.

Maintenance

• When the laser is not in use, clean the exterior parts with

a damp cloth, wipe the laser with a soft dry cloth to make

sure it is dry, and then store the laser in the kit box provided.

• Although the laser exterior is solvent resistant, NEVER use

solvents to clean the laser.

• Do not store the laser at temperatures below -20 ˚C (-5 ˚F )

or above 60 ˚C (140 ˚F).

• To maintain the accuracy of your work, check the laser often

to make sure it is properly calibrated.

• Calibration checks and other maintenance repairs may be

performed by DeWALT service centers.

Troubleshooting

The Laser Does Not Turn On

• If AA batteries are being used, make sure:

• Each battery is installed correctly, according to (+) and (–)

listed inside the battery compartment.

• The battery contacts are clean and free of rust or

corrosion.

• The batteries are new, high-quality, name brand batteries

to reduce the chance of battery leakage.

• Make sure the AA batteries or Li-ion rechargeable pack are

in proper working condition. If in doubt, try installing new

batteries.

• Be sure to keep the laser dry.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCE085R Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info