Bedienungsanleitung DeWalt DHS780 (Seite 19 von 20) (Englisch)

790832

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISH

Clamp: DE7082

(similar model

included)

Used for firmly clamping

workpiece to the saw table

for precision cutting.

Dust Bag: DE7053

(included with some

models)

Equipped with a zipper for

easy emptying, the dust bag

will capture the majority of

the sawdust produced.

SAW BLADES: ALWAYS USE 305 mm SAW BLADES WITH 25.4 mm/30 mm ARBOUR HOLES.

SPEED RATING MUST BE AT LEAST 4800 RPM. Never use a smaller diameter blade. It will

not be guarded properly. Use crosscut blades only! Do not use blades designed for ripping,

combination blades or blades with hook angles in excess of 7°.

BLADE DESCRIPTIONS

APPLICATION DIAMETER TEETH

Construction Saw Blades (thin kerf with anti-stick rim)

General Purpose 305 mm 40

Fine Crosscuts 305 mm 60

Woodworking Saw Blades (provide smooth, clean cuts)

Fine crosscuts 305 mm 80

Non-ferrous metals 305 mm 96

Consult your dealer for further information on the appropriateaccessories.

Protecting the Environment

Separate collection. Products and batteries marked with this symbol must not be

disposed of with normal householdwaste.

Products and batteries contain materials that can be recovered or recycled reducing

the demand for raw materials. Please recycle electrical products and batteries

according to local provisions. Further information is available at www.2helpU.com.

Rechargeable Battery Pack

This long life battery pack must be recharged when it fails to produce sufficient power on jobs

which were easily done before. At the end of its technical life, discard it with due care for our

environment:

• Run the battery pack down completely, then remove it from thetool.

• Li-Ion cells are recyclable. Take them to your dealer or a local recycling station. The

collected battery packs will be recycled or disposed ofproperly.

After several cuts are made at various mitre angles other than 0°, the platform may weaken

and not properly support the work. Install a new, unused platform to the saw after presetting

the desired mitreangle.

CAUTION: Continued use of a platform with several kerfs may cause loss of material

control and possibleinjury.

MAINTENANCE

WARNING: To reduce the risk of serious personal injury, turn tool off and remove

the battery packs or power supply before transporting, making any adjustments,

cleaning, repairing, or removing/installing attachments or accessories. An

accidental start-up can causeinjury.

WARNING: To reduce the risk of serious personal injury, DO NOT touch the sharp

points on the blade with fingers or hands while performing anymaintenance.

DO NOT use lubricants or cleaners (particularly spray or aerosol) in the vicinity of the plastic

guard. The polycarbonate material used in the guard is subject to attack by certainchemicals.

Lubrication

Your power tool requires no additionallubrication.

Cleaning

Before use, carefully check the upper guard, lower guard and dust duct to determine that they

will operate properly. Ensure that chips, dust or workpiece particles do not block of one of

thefunctions.

In case of workpiece fragments jammed between the saw blade and guards, disconnect the

machine from the power supply and follow the instructions given in Changing or Installing a

New Saw Blade. Remove the jammed parts and reassemble the sawblade.

Periodically clean all dust and wood chips from around AND UNDER the base and the

rotarytable.

WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen

collecting in and around the air vents. Wear approved eye protection and approved dust

mask when performing thisprocedure.

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic

parts of the tool. These chemicals may weaken the materials used in these parts. Use a

cloth dampened only with water and mild soap. Never let any liquid get inside the tool;

never immerse any part of the tool into aliquid.

Cleaning the

DeWALT

Corded Power Supply

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic

parts of the tool. These chemicals may weaken the plastic materials used in these parts.

Use a cloth dampened only with water and mild soap. Never let any liquid get inside the

tool; never immerse any part of the tool into aliquid.

Cleaning the Corded Power Supply Receptacle (Fig. D)

WARNING: Blow debris out of the corded power supply receptacle37 with clean, dry air.

To minimize the risk of eye injury, always wear eye protection and respiratory protection

when performingthis.

Dust Duct Cleaning

Depending on your cutting environment, saw dust can clog the dust duct and may prevent

dust from flowing away from the cutting area properly. With the battery pack or corded power

supply removed and the saw head raised fully, low pressure air or a large diameter dowel rod

can be used to clear the dust out of the dustduct.

XPS™ LED Worklight Cleaning

For the best worklight performance, perform the following maintenance regularly with the

battery or corded power supplyremoved.

• Carefully clean saw dust and debris from worklight lens with a cottonswab.

• DO NOT use solvents of any kind, they may damage thelens.

• Dust build-up can block the worklight and prevent it from accurately indicating the line

ofcut.

• Follow mitre saw’s instruction manual to remove and installblade.

• With blade removed from saw, clean pitch and build-up from blade. Pitch and debris can

interfere with the worklight and prevent it from accurately indicating the line ofcut.

Optional Accessories

WARNING: Since accessories, other than those offered by

DeWALT

, have not been tested

with this product, use of such accessories with this tool could be hazardous. To reduce the

risk of injury, only

DeWALT

recommended accessories should be used with thisproduct.

The following accessories, designed for your saw, may be helpful. In some cases, other locally

obtained work supports, length stops, clamps, etc., may be more appropriate. Use care in

selecting and usingaccessories.

DeWalt DHS780 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DHS780

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info