Bedienungsanleitung DeWalt DW078 (Seite 37 von 92) (Deutsch, Englisch, Dänisch, Französisch, Schwedisch, Norwegisch, Finnisch)

790946

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH

Description (ﬁ g. 1, 2)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

INTENDED USE

The DW078 rotary laser has been designed to project

laser lines to aid in professional applications. The tool

can be used both inside and outside for horizontal

(level) alignment. The applications include wall layout,

foundation leveling and deck building.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

This laser is a professional tool. DO NOT let children

come into contact with the unit. Supervision is

required when inexperienced operators use this

laser.

LASER (FIG. 1)

a. Hatch door

b. Carrying handle

c. Latch

d. Rotary laser head

e. Power button

f. Power LED indicator

g. X-axis LED indicator

h. Y-axis LED indicator

REMOTE CONTROL (FIG. 1)

i. Power button

j. Manual mode button

k. Directional arrows: up/down

l. Directional arrows: left/right

m. Power LED indicator

CHARGER (FIG. 2)

n. Battery pack

o. Release buttons

p. Charger

q. Charging indicator (red)

r. Battery cap

Electrical Safety

The electric motor has been designed for one

voltage only. Always check that the battery pack

voltage corresponds to the voltage on the rating

plate. Also make sure that the voltage of your

charger corresponds to that of your mains.

Your DEWALT charger is double insulated

in accordance with EN 60335; therefore

no earth wire is required.

WARNING: 115 V units have to

be operated via a fail-safe isolating

transformer with an earth screen

between the primary and secondary

winding.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

DEWALT service organisation.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in

the plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 3 A.

Using an Extension Cable

An extension cord should not be used unless

absolutely necessary. Use an approved extension

cable suitable for the power input of your charger

(see technical data). The minimum conductor size is

1 mm2; the maximum length is 30 m.

When using a cable reel, always unwind the cable

completely.

Unpacking

FITTING THE WARNING LABEL

The safety warnings on the label shown on the laser

must be formulated in the language of the user.

For that purpose, a separate sheet of self-adhesive

labels has been supplied with the tool.

WARNING: Check that the safety

warnings on the label have been

formulated in your language.

The warnings should read as follows:

LASER RADIATION

AVOID DIRECT EYE EXPOSURE

CLASS 3R LASER PRODUCT

• If the warnings are in a foreign language,

proceed as follows:

– Remove the required label from the sheet.

– Carefully place the label over the existing

label.

– Press the label in place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW078 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DW078

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info