Bedienungsanleitung DeWalt DW078 (Seite 39 von 92) (Deutsch, Englisch, Dänisch, Französisch, Schwedisch, Norwegisch, Finnisch)

790946

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH

Laser Control Panel Buttons (ﬁ g. 1)

POWER BUTTON

To completely power the laser unit off, the power

button on the control panel of the laser unit must be

pressed. The laser unit will also automatically power

off if it is left in Sleep Mode for 8 hours.

NOTE: Press the remote control power button to

put the laser unit into Sleep Mode. In Sleep Mode

all laser unit functions shut off except for a periodic

blink from the power LED on the control panel of the

laser unit. Press the remote control power button

again to “wake up” the laser unit.

Wireless Remote Control (ﬁ g. 1)

The remote control allows one person to operate

and setup the laser from a distance. The remote

control features a power button (i), manual mode

button (j), four arrows (k, l) and an LED transmit

indicator (m).

REMOTE CONTROL: POWER BUTTON

Press the remote control power button (i) to put the

laser unit into Sleep Mode. In Sleep Mode all laser

unit functions shut off except for a periodic blink

from the power LED (f) on the control panel of the

laser unit. Press the remote control power button

again to “wake up” the laser unit.

NOTE: To completely power the laser unit off,

the power button on the control panel of the

laser unit must be pressed. The laser unit will also

automatically power off if it is left in Sleep Mode for

8 hours.

REMOTE CONTROL: MANUAL MODE BUTTON

To activate Manual Mode, press and hold the remote

control manual mode button (j) for 3 seconds.

Manual Mode must be activated to use manual

sloping. (Refer to Using Manual Slope Mode for a

complete description of this function.)

To re-engage full self-leveling, press and hold the

manual mode button again for 3 seconds.

Using Manual Slope Mode:

The DW078 Manual Slope Mode allows the

self-leveling function to be disabled in one axis

(direction) so that the laser can be sloped in that

axis. The other axis will continue to self-level,

ensuring that the laser beam is only sloping in

the expected direction.

Entering and exiting Manual Slope Mode:

• To activate Manual Slope Mode, press

and hold the remote control manual

mode button (j) for 3 seconds.

• To re-engage full self-leveling, press and

hold the manual mode button again for

3 seconds.

Setting the Slope Direction:

• When Manual Slope Mode is activated,

the unit automatically engages Manual

Y Mode. This allows the operator to slope

the laser in the direction of the Y-axis,

as indicated by the “gunsights” on the

rollcage.

In certain situations, it may be desirable to

slope the laser in the X-axis. The direction

of Manual Slope Mode can be changed

back and forth between the Y- and

X-axes as follows:

– Immediately (within 5 seconds) after

entering Manual Slope Mode, press

and hold the remote control right arrow

button to activate Manual X Mode.

– The unit can be changed back to

Manual Y Mode by immediately

pressing and holding the remote control

left arrow button.

– To change the direction of Manual

Slope Mode at a later time, re-engage

full self-leveling, then activate Manual

Slope Mode again and go through the

axis selection procedure outlined above.

The X and Y LED indicator lights on the

laser unit control panel (g, h) will indicate the

manual slope direction that is selected. The

manually controlled axis is identified by a

turned-off LED, and the self-leveling axis is

identified by a lighted LED.

Setting the Amount of Slope:

Once Manual Slope Mode is activated, the

amount of slope can be manually adjusted

using any of the following methods:

• Use the remote control up and down

arrow buttons (k) to tilt the laser rotor

head up and down.

• The entire laser unit can be tipped up and

down by setting it on a sloped surface.

Make sure the laser unit is positioned so

the direction of manual sloping is lined

up in the same direction as the sloped

surface.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW078 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DW078

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info