Bedienungsanleitung DeWalt DW078 (Seite 40 von 92) (Deutsch, Englisch, Dänisch, Französisch, Schwedisch, Norwegisch, Finnisch)

790946

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH

REMOTE CONTROL: ARROW BUTTONS

The arrow buttons (k, l) are used for different

functions depending on the operating mode of the

laser unit.

In Self-Leveling Horizontal Mode:

In this mode, the arrow buttons have no

function.

In Manual Horizontal Mode:

The arrow buttons (k) are used to tilt the laser

head up or down in the X or Y directions

as marked on the protective roll cage of the

laser unit.

In Manual Vertical Mode:

The up and down arrows (k) tilt the laser

beam clockwise and counterclockwise.

The left and right arrows (l) move the laser

beam left and right.

NOTE: The DW078 does not have a

self-leveling vertical mode.

Height of Instrument Alert

The DW078 has a built-in alarm feature that alerts

the operator if the unit is disturbed after the unit

has self-leveled. The laser unit will stop rotating, the

control panel LED indicator lights will flash and the

beeper will sound.

TO RESET THE LASER UNIT FOR CONTINUED USE

• Turn the unit off and back on again using the

power button on the laser unit control panel.

• Put the unit in sleep mode and then wake it

back up using the power button on the remote

control.

NOTE: Always recheck the laser setup after the

Height of Instrument Alert has triggered.

Laser Accessories

DIGITAL LASER DETECTOR (FIG. 4)

The detector helps in locating the position of a

laser beam in bright light conditions or over long

distances. It produces both visual and audio signals

as the rotating laser beam crosses the detector.

The detector can be used both indoor and outdoor

whenever it is difficult to locate the laser beam.

The detector is not for use with non-rotating lasers

but is compatible with most rotary red-beam or

infrared (invisible) beam lasers on the market.

The DEWALT Digital Laser Detector can be used

with or without the detector clamp. When used

with the clamp, the detector can be positioned on a

grade rod, leveling pole, stud or post.

Accuracy

When the laser is operated using the detector, the

accuracy level of the detector needs to be added to

that of the laser.

• Constant accuracy (detector in narrow setting)

± 1.0 mm

• Nominal accuracy (detector in wide setting)

± 3.0 mm

For most accurate results, start the operation using

the wide setting and finish in the narrow setting.

Mounting Detector on a Grade Rod (fig. 4)

1. To secure your detector to a grade rod, first

attach the detector to the clamp by pushing in

on the clamp latch (u). Slide the tracks (v) on the

clamp around the rail (w) on the detector until

the latch (x) on the clamp pops into the latch

hole (y) on the detector.

2. Open the jaws of the clamp by turning the

clamp knob (z) counterclockwise.

3. Position the detector at the height needed and

turn the clamp knob clockwise to secure the

clamp on the rod.

4. To make adjustments in height, slightly loosen

the clamp, reposition and retighten.

Optional Accessories

WARNING: Since accessories, other

than those offered by DEWALT, have

not been tested with this product, use

of such accessories with this laser

could be hazardous. To reduce the risk

of injury, only DEWALT-recommended

accessories should be used with this

product.

These are:

• Laser enhancement glasses

• DE0730 Target card

• DE0790 DEWALT Wall mount

• DE0734 DEWALT Grade rod

• DE0735 DEWALT Tripod

• DE0736 DEWALT Tripod

• DE0737 DEWALT Grade rod

• DE0738 DEWALT Gradient bracket

• DE9135 DEWALT LI charger

• DEWALT Battery packs:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW078 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DW078

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info