Bedienungsanleitung DeWalt DW078 (Seite 38 von 92) (Deutsch, Englisch, Dänisch, Französisch, Schwedisch, Norwegisch, Finnisch)

790946

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH

ASSEMBLY

WARNING: Prior to assembly and

adjustment, always remove the battery

pack. Always switch off the tool before

inserting or removing the battery pack.

WARNING: Use only DEWALT battery

packs and chargers.

Inserting and Removing the

Battery Pack from the Tool (ﬁ g. 2)

TO INSTALL THE BATTERY PACK

1. Release latch (c) to open the hatch door (a).

Insert the battery pack (n).

CAUTION: The laser will operate even

if battery door is not fully latched. To

secure the battery, always ensure

battery door is closed and latched.

2. Slide the battery pack in firmly.

3. Close the hatch door and fasten latch.

TO REMOVE THE BATTERY PACK

1. Release latch to open the hatch door.

2. Remove the battery pack.

3. Insert battery pack into the charger to recharge

it. (Refer to Charging Procedure.)

Setting Up the Laser (ﬁ g. 3)

The laser facilitates various set-ups, making it useful

for several applications.

TRIPOD SET-UP (FIG. 3)

1. Position the tripod securely and set it to the

desired height.

2. Make sure that the top of the tripod is roughly

level. The laser will self-level only if the top of the

tripod is within ± 5˚ of level. If the laser is set up

too far out of level, it will beep when it reaches

the limit of its leveling range. No damage will be

done to the laser, but it will not operate in an

“out of level” condition.

3. Secure the laser to the tripod by screwing the

threaded knob (s) on the tripod into the female

thread (t) on the bottom of the laser.

NOTE: Be sure that the tripod you are working

with has a 5/8"–11 threaded screw to ensure

secure mounting.

4. Turn the laser on.

OPERATION

WARNING: Always observe the safety

instructions and applicable regulations.

• To extend battery life per charge, turn the laser

off when it is not in use.

• To ensure the accuracy of your work, check

the laser calibration often. Refer to Field

Callibration Check under Laser Maintenance.

• Before attempting to use the laser, make sure

the tool is positioned on a relatively smooth,

secure surface.

• Always mark the centre of the laser line or

dot. If you mark different parts of the beam at

different times you will introduce error into your

measurements.

• To increase working distance and accuracy, set

up the laser in the middle of your working area.

• When attaching to a tripod or wall, mount the

laser securely.

• To increase beam visibility, wear Laser

Enhancement Glass es and/or use a Laser

Target Card to help find the beam.

• Extreme temperature changes can cause

movement or shifting of building structures,

metal tripods, equipment, etc., which can affect

accuracy. Check your accuracy often while

working.

• If the laser is dropped or suffers a sharp blow,

have the calibration system checked by a

qualified service centre before using the laser.

Laser Control Panel (ﬁ g. 1)

The laser is controlled by the power button (e). Three

LED indicator lights are on the control panel: power

(f), X-axis leveling (g), Y-axis leveling (h).

TURNING THE LASER ON (FIG. 1)

1. Insert the fully charged battery pack. Be sure

that the battery door is securely latched.

2. Gently press the power button (e) to power the

laser on. The power LED light (f) will illuminate.

If the laser is out of level, the X-axis (g) and/or

Y-axis (h) leveling lights will flash until the laser

is level.

NOTE: The head will begin or resume rotation once

the laser is level.

TURNING THE LASER OFF

Gently press the power button to turn the laser

off. The power LED indicator light will no longer be

illuminated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW078 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DW078

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info