Bedienungsanleitung DeWalt DWE314 (Seite 24 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

712355

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

ENGLISH

5) Service

a ) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool ismaintained.

Additional Safety Rules for Oscillating Multi-

Tool



WARNING: Take special care when sanding some woods

(e.g. beech, oak) and metal which may produce toxic dust.

Wear a dust mask specifically designed for protection

against toxic dust and fumes and ensure that persons

within or entering the work area are alsoprotected.



WARNING: Use this tool in a well-ventilated area when

sanding ferrous metals. Do not operate the tool near

flammable liquids, gases or dust. Sparks or hot particles

from sanding or arcing motor brushes may ignite

combustiblematerials.

Sanding Paint



WARNING: Observe the applicable regulations for

sanding paint. Pay special attention to the following:

• Whenever possible, use a vacuum extractor for dustcollection.

• Take special care when sanding paint which is possibly lead

based:

- Do not let children or pregnant women enter the

workarea.

- All persons entering the work area should wear a mask

specially designed for protection against lead paint dust

andfumes.

- Do not eat, drink or smoke in the workarea.

• Dispose of dust particles and any other removal debrissafely.

• Hold power tool by insulated gripping surfaces when

performing an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with a "live"

wire will make exposed metal parts of the tool "live" and shock

theoperator.

• Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding the

work by hand or against your body leaves it unstable and may

lead to loss ofcontrol.



WARNING: We recommend the use of a residual current

device with a residual current rating of 30mA orless.

Residual Risks

In spite of the application of the relevant safety regulations

and the implementation of safety devices, certain residual risks

cannot be avoided. These are:

• Impairment ofhearing.

• Risk of personal injury due to flyingparticles.

• Risk of burns due to accessories becoming hot

duringoperation.

• Risk of personal injury due to prolongeduse.

Electrical Safety

The electric motor has been designed for one voltage only.

Always check that the power supply corresponds to the voltage

on the ratingplate.

Your

DeWALT

tool is double insulated in accordance

with EN60745; therefore no earth wire isrequired.



WARNING: 115 V units have to be operated via a fail-safe

isolating transformer with an earth screen between the

primary and secondarywinding.

If the supply cord is damaged, it must be replaced by a

specially prepared cord available through the

DeWALT

serviceorganisation.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the oldplug.

• Connect the brown lead to the live terminal in theplug.

• Connect the blue lead to the neutralterminal.



WARNING: No connection is to be made to the

earthterminal.

Follow the fitting instructions supplied with good quality plugs.

Recommended fuse: 13A.

Using an Extension Cable

An extension cord should not be used unless absolutely

necessary. Use an approved extension cable suitable for

the power input of your charger (see Technical Data). The

minimum conductor size is 1.5 mm

; the maximum length

is30m.

When using a cable reel, always unwind the cablecompletely.

Package Contents

The package contains:

1 Adaptor for all blades (DWE315SF, DWE315B, DWE315KT,

DWE314K)

1 Dust extraction adaptor (DWE315KT)

1 Cutting guide (DWE315KT)

1 31mm x 43mm fastcut wood blade (DWE314K, DWE315KT)

1 31mm x 43mm wood with nails blade (DWE315SF,

DWE315KT, DWE315B, DWE314K)

1 100mm Semicircle blade (DWE314K, DWE315KT)

1 Sanding-pad (DWE314K, DW315, DWE315B, DWE315KT)

25 Assorted sandpaper pieces (DWE314K, DW315, DWE315B,

DWE315KT)

1 9.5mm x 43mm wood detail blade (DWE315KT)

1 3mm Carbide grout removal blade

(100mm half moon) (DWE315KT)

1 Rigid scraper blade (DWE315SF, DWE315B, DWE315KT,

DWE314K)

1 Hex key (DWE315SF, DWE315B, DWE315KT, DWE314K)

1 Kit box (DWE314K, DWE315KT)

1 Kit bag (DWE315B)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DWE314 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info