Bedienungsanleitung DeWalt DWE314 (Seite 25 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

712355

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

ENGLISH

1 Instruction manual (DWE315SF, DWE315B, DWE315KT,

DWE314K)

1 Exploded drawing (DWE315SF, DWE315B, DWE315KT,

DWE314K)

• Check for damage to the tool, parts or accessories which may

have occurred duringtransport.

• Take the time to thoroughly read and understand this manual

prior tooperation.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual beforeuse.

Wear earprotection.

Wear eyeprotection.

Wear respiratoryprotection.

Date Code Position (Fig. A)

The date code

, which also includes the year of manufacture,

is printed into thehousing.

Example:

2017 XX XX

Year of Manufacture

Description (Fig. A)



WARNING: Never modify the power tool or any part of it.

Damage or personal injury couldresult.

Variable speed trigger

LED Worklight

Accessory clamp lever

Lock-on button

Accessory side mount slots

Cut guide block

Cut guide arm

Intended Use

This oscillating multi-tool is designed for professional detail

sanding, plunge cutting, flush cutting, removal of excess

materials and surface preparationapplications.

DO NOT use under wet conditions or in the presence of

flammable liquids orgases.

This oscillating multi-tool is a professional powertool.

DO NOT let children come into contact with the tool.

Supervision is required when inexperienced operators use

thistool.

• Young children and the infirm. This appliance is not

intended for use by young children or infirm persons

withoutsupervision.

• This product is not intended for use by persons (including

children) suffering from diminished physical, sensory or

mental abilities; lack of experience, knowledge or skills

unless they are supervised by a person responsible for their

safety. Children should never be left alone with thisproduct.

ASSEMBLY AND ADJUSTMENTS



WARNING: To reduce the risk of serious personal

injury, turn tool off and disconnect tool from power

source before making any adjustments or removing/

installing attachments or accessories. Be sure the

trigger switch is in the OFF position. An accidental start-up

can causeinjury.

Installing/Removing Accessories (Fig. B–F)

Tool-free Accessory clamp (Fig. B–D)

The DWE314, DWE315 features a quick change accessory

system. This allows for faster accessory changes without the

need for wrenches or hex keys like other oscillating toolsystems.

1. Grasp the tool and squeeze the accessory clamping lever

3

as shown in figureB.

2. Clean any residual debris from the tool shaft and the

accessoryholder.

3. Slide the accessory between the shaft

8

and the accessory

holder making sure the accessory engages all eight pins on

the holder and is flush with the shaft. Ensure the accessory is

oriented as shown in FigureC.

4. Release the accessory clamplever.

NOTE: Some accessories, such as scrapers and blades can be

mounted at an angle if required as shown in figureD.

Installing/Removing Sanding Sheets

(Fig. E)

A diamond shaped platen uses a hook and loop adhesion

system to attach the sanding sheets. The platen allows you to

use it on large flat surfaces and tight spots orcorners.

1. Attach the sanding platen

9

as described under Installing/

RemovingAccessories.

2. Align the edges on the sanding sheet, with the edge of

the sanding platen and press the sanding sheet

10

onto

theplaten.

3. Firmly press the base with the sanding sheet attached

against a flat surface and briefly switch the tool on. This

provides for good adhesion between the platen and the

sanding sheet and also helps to prevent prematurewear.

4. When the tip of the sanding sheet becomes worn, detach

the sheet from the platen, rotate andreapply.

Attaching Accessories Using The Universal

Adapter (Fig. F)



CAUTION: To avoid injury, do not use any accessory

for an application where the adaptor may fail to hold

theaccessory.



CAUTION: Read and follow all manufacturers' safety

warnings for any accessories used with thistool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DWE314 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info