Bedienungsanleitung DeWalt DWE4246 (Seite 41 von 204) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

712331

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

ENGLISH

Intended Use

Your heavy-duty small angle grinder has been designed for

professional grinding, sanding (DWE4238 is excluded), wire

brushing and cuttingapplications.

DO NOT use grinding wheels other than centre depressed

wheels and flapdiscs.

DO NOT use under wet conditions or in the presence of

flammable liquids orgases.

Your heavy-duty angle grinder is a professional power tool.

DO NOT let children come into contact with the tool.

Supervision is required when inexperienced operators use

thistool.

• Young children and the infirm. This appliance is not

intended for use by young children or infirm persons

without supervision.

• This product is not intended for use by persons (including

children) suffering from diminished physical, sensory or

mental abilities; lack of experience, knowledge or skills

unless they are supervised by a person responsible for their

safety. Children should never be left alone with thisproduct.

Anti-vibration Side Handle

The anti-vibration side handle offers added comfort by

absorbing the vibrations caused by thetool.

Dust Ejection System (Fig. A)

The dust ejection system

10

prevents dust pile-up around

the guard and motor inlet, and minimises the amount of dust

entering the motorhousing.

Soft Start Feature

DWE4206, DWE4207, DWE4216, DWE4217, DWE4227,

DWE4237, DWE4238, DWE4246, DWE4257

The soft start feature allows a slow speed build-up to avoid an

initial jerk when starting. This feature is particularly useful when

working in confinedspaces.

No-Volt

DWE4206, DWE4207, DWE4216, DWE4217, DWE4227,

DWE4237, DWE4238, DWE4246, DWE4257

The No-volt function stops the grinder restarting without the

switch being cycled if there is a break in the powersupply.

Electronic Clutch

DWE4227, DWE4246, DWE4257

The electronic torque limiting clutch reduces the maximum

torque reaction transmitted to the operator in case of jamming

of a disc. This feature also prevents the gearing and electric

motor from stalling. The torque limiting clutch has been factory-

set and cannot be adjusted.

ASSEMBLY AND ADJUSTMENTS



WARNING: To reduce the risk of serious personal

injury, turn tool off and disconnect tool from power

source before making any adjustments or removing/

installing attachments or accessories. Be sure the

trigger switch is in the OFF position. An accidental start-up

can cause injury.

Attaching Side Handle (Fig. B)



WARNING: Before using the tool, check that the handle is

tightenedsecurely.

Screw the side handle

3

tightly into one of the holes on either

side of the gear case. The side handle should always be used to

maintain control of the tool at alltimes.

Guards



CAUTION: Guards must be used with all grinding

wheels, cutting wheels, sanding flap discs, wire

brushes, and wire wheels. The tool may be used

without a guard only when sanding with conventional

sanding discs. Refer to Figure A to see guards provided

with the unit. Some applications may require purchasing

the correct guard from your local dealer or authorized

service centre.

NOTE: Edge grinding and cutting can be performed with Type

27 wheels designed and specified for this purpose; 6.35 mm

thick wheels are designed for surface grinding while thinner

Type 27 wheels need to be examined for the manufacturer's

label to see if they can be used for surface grinding or only

edge grinding/cutting. A Type 1 guard must be used for any

wheel where surface grinding is forbidden. Cutting can also be

performed by using a Type41 wheel and a Type 1guard.

NOTE: See the Accessories Chart to select the proper guard /

accessory combination.

Adjusting and Mounting Guard (Fig. C, D)



CAUTION: Turn unit off and unplug the tool before

making any adjustments or removing or installing

attachments or accessories.



CAUTION: BEFORE operating the tool, identify which

guard adjustment option your tool is set to.

Adjustment Options

For guard adjustment, the guard release lever

9

engages one of

the alignment holes

15

on the guard collar using a ratcheting

feature. Your grinder offers two options for this adjustment.

• One-touch

: In this position the engaging face is slanted

and will ride over to the next alignment hole when guard

is rotated in a clockwise direction (spindle facing user) but

self-locks in the anti-clockwise direction.

• Two-touch

: In this position the engaging face is straight

and squared off. It will NOT ride over to the next alignment

hole unless guard release lever is pressed and held while

simultaneously rotating the guard in either a clockwise or

anti-clockwise direction (spindle facing user).

One-Touch

Two-Touch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DWE4246 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info