Bedienungsanleitung Dirt Devil m 5050 infitnity vx 8 (Seite 14 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

318503

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

5 Maintenance

5.1 Emptying and cleaning the dust container

 It is best to empty the dust container after each vacuuming session.

 But empty the dust container at latest when:

- when the "MAX" marking (Fig. 9/B1) has been reached,

- when the cleaning indicator (Fig. 1/13, optional) lights up,

- before prolonged storage or re-shipment.

1. Switch off the appliance,Zchapter 4.3, „Switching off“

2. Push the release button for the dust container (Fig. 9/A).

3. Remove the dust container by pulling it upwards out of its receptacle.

4. Empty the dust container by holding it low over a dustbin and only then

press the release button for the bottom plate (Fig. 9/B).

5. Also clean the cyclone unit on this occasion. Zchapter 5.2, „Cleaning

the cyclone unit and the dual motor protection filter“. Otherwise, the

dust container cannot be cleaned.

6. Remove any residual dust from the dust container using a dry cloth or

a soft brush, e. g. the supplied furniture brush.

7. Close the dust compartment bottom plate.

5.2 Cleaning the cyclone unit and the dual motor protection filter

1. Switch off the appliance,Zchapter 4.3, „Switching off“

2. Remove and empty the dust container, Zchapter 5.1, „Emptying and

cleaning the dust container“.

3. Release the dust compartment cover by twisting it.

The marking on the cover moves from U to S (Fig. 10/A).

4. Take off the cover (Fig. 10/B).

5. Take the dual motor protection filter out of the cyclone unit by pulling it

by the two tabs provided for this (Fig. 10/C).

6. Hold the dual motor protection filter low over a dustbin.

7. Only now separate the two filter elements from each other (Fig. 11/A).

8. Beat the dirt from the filter elements by tapping them lightly over a dust-

bin. Remove larger agglomerations of dirt by hand.

9. If the filter elements are still dirty after this procedure, thoroughly rinse

them by hand in running water (Fig. 11/B) until all dirt is gone.

10. If a filter element is damaged or too dirty, replace it with a new one (or-

dering information Zchapter 5.5, „Spare parts and accessories“).

11. Put the new / cleaned and completely dry foam plastic motor protection

filter back into its holder.

12. Now remove the cyclone unit from the dust container (Fig. 11/C).

13. Remove any residual dust clinging to the cyclone unit using a dry cloth

or a soft brush, e.g. the supplied furniture brush.

14. Put the dual motor protection filter with the refitted filter elements into

the cleaned cyclone unit.

15. Put the cyclone unit back into the dust container (Fig. 12/A). If the cy-

clone unit does not sink readily into the dust container, twist it a bit until

it sinks by itself.

16. Fit the cover so that the marking on its top is above the S (Fig. 12/B,

C).

17. Fix the cover by twisting it in the U direction (Fig. 12/C).

18. Before putting the dust container back into its receptacle, check the

particle trap for residues in the suction channel, Zchapter 5.3, „Clean-

ing the particle trap“.

ATTENTION:

Switch off the appliance before emptying the dust container. This will

prevent dust from damaging the appliance.

NOTE:

You can dispose of the contents of the dust container with your regular

domestic waste as long as it does not contain any substances not per-

mitted in domestic waste.

MAX

ATTENTION:

The filter elements are washable, but may not be cleaned in dishwash-

ers or washing-machines. Also, do not use detergents or brushes with

hard bristles to clean the filters. Let the filters dry for approx 24 hours at

room temperature after cleaning. Only put them back into the appliance

when they are completely dry.

Infinity Excell.book Seite 14 Dienstag, 1. März 2011 9:33 09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dirt Devil m 5050 infitnity vx 8 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info