768190
28
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
7.0 MENU AND PICTURE SETTING
28 R699740 - DreamBee User Manual
7.3 Image Menu
Contrast
The contrast function is used to adjust the contrast between the light and dark areas of the displayed image. A
correct contrast setting is important for good image reproduction. Adjust the Contrast value between -30 and +30.
Brightness
The brightness function is used to adjust the overall light output. Adjust the Brightness value between -30 and +30.
MENU
Image
Image Adjust
Brightness
Color
The Color function (or Saturation) is used to adjust the color saturation levels. Adjust the Color value between -30
and +30. MENU
Image
Image Adjust
Color
Tint
The Tint function is used to adjust the color hue to obtain true color reproduction and is only active for NTSC
sources on Video and S-Video inputs. Adjust the Tint value between -30 (more red) and +30 (more green).
MENU
Image
Image Adjust
Tint
Sharpness
The Sharpness function is used to adjust the image sharpness of the picture. Adjust the Sharpness value between
-30 (soft) and +30 (sharp).
MENU
Image
Image Adjust
Sharpness
DNR
The DNR function (Digital Noise Reduction) is used to reduce digital noise on the picture. Adjust the DNR value
between 0 (low) and +30 (high).
MENU
Image
Image Adjust
DNR
Color Temp.
Color temperature can be set to Low, Middle, High, User 1 or User 2. (User 1 and 2 allows a fine adjustment of the
values for red, green, and blue channels).
Color temperature stands for the spectral properties of a light source. Low color temperature implies warmer (more
yellow/red) light while high color temperature implies a colder (more blue) light.
The User settings allow a manual configuration of each primary color Red, Green and Blue from -255 to 0.
*TEST PATTERN MENU
Press the [ENTER] button to switch to the test pattern image. Press the [ENTER] or [TEST] button to alter the test
pattern to be projected. Press the [EXIT] button to clear the menu screen.Press the [EXIT] button again to clear the
test pattern.
Accurate picture calibrations may require professional tools such as dedicated software and colormeter.
Enter Image Adjust Menu Select Contrast tab Set a Value between -30 and +30
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DreamVision DreamBee wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info