768190
30
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
7.0 MENU AND PICTURE SETTING
30 R699740 - DreamBee User Manual
Mask
The Mask function is used to hide the outer area of the picture. Adjust the Mask value between 0%, 2,5% and 5%.
MENU
Setup
Mask
Off, 2,5% or 5%
7.5 Custom Image Profile
You can adjust the projected image to a desired image quality and save the adjusted values into the Image profile
Menu. Besides the default “Cinema”, “Natural” and “Dynamic” settings, there are 3 more types of user-defined
settings for image profile.
Parameters stored into an Image Profile
An Image Profile defines a set of values that customize a picture setting. These values can be stored into memory
in User 1, User 2 and User 3 Image Profiles. The following parameters can be adjusted and memorized:
Contrast
•Brightness
Color
Sharpness
DNR
Color Temp.
Gamma
Offset
Setting a new Image Profile
Select a Preset Image Profile
MENU
Setup
Image Profile
Cinema
Go to Image Adjust Menu and modify the Contrast / Brightness / Color / Sharpness / DNR / Color Temp. /
Gamma and Offset values to your convenience.
MENU
Image
Image Adjust
Contrast
set a value between -30 and +30
MENU
Image
Image Adjust
Brightness
set a value between -30 and +30
MENU
Image
Image Adjust
Color
set a value between -30 and +30
MENU
Image
Image Adjust
Sharpness
set a value between -30 and +30
MENU
Image
Image Adjust
DNR
set a value between 0 and +30
MENU
Image
Color Temp.
set a value between -255 and 0 for each color
MENU
Image
Gamma
set to Normal / A / B or C
MENU
Image
Offset
set a value between -30 and +30 for each color
•Save these values into a User Profile, by example User 1:
MENU
Setup
Profile Memory
Save User 1
If you want to reset the Preset Image Profiles (Cinema, Natural and Dynamic), you can reset to default values
through the Profile Memory Menu.
MENU
Profile Memory
Reset Cinema
MENU
Profile Memory
Reset Natural
MENU
Profile Memory
Reset Dynamic
7.6 Video Menu
COMP
You can set up to 6 profiles: Cinema, Natural, Dynamic, User 1, User 2 and User 3. The Image Profile can
be directly accessed with the Remote Control Unit buttons.
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DreamVision DreamBee wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info