768190
31
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
7.0 MENU AND PICTURE SETTING
R699740 - DreamBee User Manual 31
The COMP function is used to configure the input signal of the Component Input terminal.
•Y Pb/Cb Pr/Cr to be selected when a component video signal is input.
RGB to be selected when a RGB video signal is input.
SCART to be selected when a RGB video signal with Sync signal is input. Typically from a video source
equipped with a SCART output. (European market)
HDMI Color Space
The HDMI function is used to define the active color space of the HDMI input.
•Auto, Configure the color space automatically
YCbCr(4:4:4) for a video source with YCbCr 4:4:4 color encoding.
YCbCr(4:2:2) for a video source with YCbCr 4:2:2 color encoding.
RGB for a video source with RGB color encoding.
Aspect
The Aspect function can stretch the picture on the screen.
4:3 sets the screen size of the picture into a 4:3 image.
16:9 set the screen size of the picture to 16:9
Zoom enlarge the picture vertically to fill the screen
Film Mode
The Film Mode function can detect the video cadence of film based video. This function can be switch off.
•Auto, for normal circumstances
Off, switch the Film Mode Off when you are not watching movies shot on film
Color System
The Color System function is available for S-Video and Video inputs. This function is used to configure the color
system to be used. Adjust the Color System value to Auto / NTSC / NTSC4,43 / PAL / PAL-M / PAL-N / SECAM.
Black Level
The Black Level function enhances the black level of NTSC sources on S-Video and Video inputs. Adjust its value to
0% or 7,5%.
7.7 Install Menu
Menu Position
Sets the On Screen Menu position.
Menu Display
Sets the duration for displaying the Menu.
15 sec.
•On
Line Display
Sets whether to display the input when switching input.
•5 sec. Displays the selected input during 5 seconds after switching.
Off, the active input is not displayed.
Flip H.
Set Flip H. On if the unit is used for rear projection.
Flip V.
Set Flip V. On if the unit is installed in ceiling position.
High Altitude
Set High Altitude On when using the unit at low atmospheric pressure, typically higher than 900 meters above sea
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DreamVision DreamBee wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info