7 Push buttons
By means of the push buttons it is possible to control the clamps and
to start the sewing operation. According to the setting in the service
menu (see service instructions) the function is different.
1. Setting
–
Key 1: The clamps are opened or closed respectively.
–
Key 2: The sewing operation starts when the clamps are closed.
2. Setting
–
Key 1: The clamps are opened or closed respectively.
–
Key 2: If the clamps are not lowered, they will be lowered now. The
sewing operation starts.
8 Setting the fabric stops
Caution: Danger of injury !
Adjust the fabric stops only when the buttonhole automat
is switched off!
–
Place the sewing material until it touches the fabric stops 2 on
both sides (right and left).
–
Loosen the screws 1 on the right and left.
–
Adjust the sewing position by moving the fabric stops 2.
–
Tighten the screws 1 again.
22
1
1
2
