Bedienungsanleitung Ecm Synchronika (Seite 24 von 33) (Deutsch, Englisch)

654249

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Bedienungsanleitung / User Manual SYNCHRONIKA

ENGLISH

Important

Please make sure that only your authorized ECM-dealer connects the machine to the water supply

and installs the pressure regulator and shut off valve.

To avoid calcification of the machine a water-softener is recommended.

The machine may only be descaled by your specialised dealer because a partial disassembly of the

boiler and the tubing may be necessary to prevent the system from being blocked by lime residues.

A late descaling can cause substantial damage to the machine.

The residual water is disposed off periodically by emptying out the water drip tray. Alternatively, you can hook the

machine directly up to a water drainage. Please proceed as follows: Remove the sealing screw in the drip tray and

fasten the drainage container to the rim below the drip tray. Connect a suitable hose (not included with delivery) to

the drip tray and to an already installed drainage syphon.

4.4 Manual adjustment of the brewing pressure

The brewing pressure of the machine can be adjusted manually, without opening the machine, through an adjusting

screw at the bottom of the machine. This adjustment must be carried out by expert specialists.

5 FIRST USE

5.1 First use

Read the instruction manual carefully prior to operating the machine.

Prior to starting the machine, check if:

• the steam and hot water valves are closed.

• the machine is switched off. (Power switch in the vertical position.)

• the power cord is disconnected.

• the drip tray is inserted accurately.

Now you can start up your machine:

Machine in use with water tank (steam/ hot water boiler activated)

1 Please make sure that the valve at the bottom panel of the machine and the switch behind the drip tray are in

the correct position (see chapter 4.3, image 3 and 4).

2 Open the cup warming tray. Take out the water tank and rinse it thoroughly.

3 Fill the water tank with fresh water deficient in lime, place it back into the water tank guides and close the cup

warming tray.

4 Plug the machine into an electrical outlet and position the brew lever upwards.

5 Turn the machine on by placing the metal switch in the upper position. The green control lamp and the PID

display will come on and a pump noise will be heard. The coffee boiler and the steam/ hot water boiler are now

filled with water simultaneously.

6 As soon as water is released through the brew group, position the brew lever back downward. If there is still a

pump noise, the filling of the steam/ hot water boiler is still being completed.

7 If the pump stops and the PID display turns off while the boilers are filled, you have to refill fresh water in the

water tank.

8 If there is enough water in the water tank again, the pump starts to operate again.

9 As soon as both boilers are filled with water, the pump will become quiet. The PID display and the orange

control lamp will illuminate. Both boilers are now being heated in succession whereby the coffee boiler has

priority.

10 The PID display will show the current temperatures of both boilers alternately (see chapter 3.3).

11 The machine is ready for coffee preparation as soon as the PID display indicates the pre-set nominal

temperature of 93°C (factory setting). The machine is ready for steam/ hot water dispension as soon as the PID

display indicates the pre-set nominal temperature of 123°C (factory setting) or the boiler pressure gauge

indicates a value of about 1.0-1.5 bars.

12 Manual boiler venting is not necessary because the Synchronika contains a professional

anti-vacuum valve, which automatically vents the boiler during the heat-up phase. This venting process is done

by way of the brew group, directly into the drip tray. Caution, steam forms!

13 The machine is now ready for use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ecm Synchronika Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ecm Synchronika

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info